If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I did and the response I got was this is normal because there ovens expand and contract, every oven I have ever seen doesn't look like this.
It appears to me that the floor brick was not cut right, here are a few more pictures,
How wide are the gaps between the oven wall and floor? I just received my Primavera 70. The floor is basically flush with the wall on one side and there is 1/2 to 3/4 inch gap on the other. Is this normal?