If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Cut limestone. It's the same material we used on the fireplace surround -- we bought a big slab. The lower stand will be a rough, rustic, stacked limestone. They are different, but similar. It cuts pretty easily -- and you can sand/grind it at the end to get a smooth finish.
It's a monster arch. 4 1/2" deep and 11" wide.