web analytics
Help Needed!!! Newbie Trying to design a Pompeii Oven. - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse
No announcement yet.

Help Needed!!! Newbie Trying to design a Pompeii Oven.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help Needed!!! Newbie Trying to design a Pompeii Oven.

    Hello,

    I'm new to the forum and I'm looking for any help/advice I can get.

    I plan on building a mobile Pompeii Oven. I have an old steel crate pallet that I found which would make the perfect base once I weld some castors to it. The problem is my total surface area I can build on is 1440mm x 1110mm (Roughly 4'-8" x 3'-7"). A 36" oven does not fit so I was wondering if someone could help me with the over all measurments & Specs for a 30" Interior Diameter Oven, or an oven size that would work better with this platform.

    How high would the vault have to be?
    What are the opening widths & heights?
    How big of a vent landing should be used?

    Any help would be greatly appreciated! I can't wait to get this project started.

    Thank you,

    -Rino
Working...
X