web analytics
angle iron question - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse
No announcement yet.

angle iron question

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • angle iron question

    My neighbor has 2" angle iron, but it is 1/4" thick. This is a freebee. The plans call for 3/8". Will using the 1/4" compromise my oven? Would using more rebar in the front of the slab make up the difference?

    Thanks,
    Tom
    Member WFOAMBA Wood Fired Oven Amatueur Masons Builders America

  • #2
    Re: angle iron question

    You'll be fine with quarter inch angle iron. Builders have been using recycled bed frame angles, which are thinner than that.
    My geodesic oven project: part 1, part 2

    Comment

    Working...
    X