web analytics
Size of Angle Iron for Base - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse
No announcement yet.

Size of Angle Iron for Base

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • tdibratt
    started a topic Size of Angle Iron for Base

    Size of Angle Iron for Base

    Looking to build an outdoor oven and have a question about the type and size of steel used for the Overn base to hold the top course of blocks. It suggests 2x2 angle iron. Is it galavanized? How thick should it be to hold the weight?

    Thx

  • ColonelCorn76
    replied
    1/4" is fine and it doesn't need to be galvanized. Paint it with some Rustoleum and it's good to go (it usually gets another coating of something else when you finish the walls too).

    Jim

    Leave a comment:

Working...
X