web analytics
Stucco Over Angle Iron - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Dome Installation Video - Casa / Premio / Modena

Hello,

For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.

https://www.youtube.com/watch?v=-7q7...jSniYogfUra06Q

If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Stucco Over Angle Iron

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Anders
    started a topic Stucco Over Angle Iron

    Stucco Over Angle Iron

    I have finished installing my oven and I am about to apply a stucco finish to both the oven and the stand. I have constructed the stand out of cinder blocks (as instructed in the FB oven installation manuals) and have used 2" angle iron to support the blocks over the opening for wood storage.

    I imagine applying the stucco directly over the exposed metal angle iron will be a problem, as I am concerned that it will not adhere properly. Does anyone have any recommendations here?

  • Les
    replied
    Re: Stucco Over Angle Iron

    Originally posted by Anders View Post
    Tscarborough,

    CMU?
    Concrete Masonry Unit (your blocks)

    Les...

    Leave a comment:


  • Anders
    replied
    Re: Stucco Over Angle Iron

    Ahhh...perfect. Thanks again

    Leave a comment:


  • Tscarborough
    replied
    Re: Stucco Over Angle Iron

    Concrete nails into the joints.

    Leave a comment:


  • Anders
    replied
    Re: Stucco Over Angle Iron

    Tscarborough,

    Thanks for the reply. Any recommendations for affixing the lathe over the angle iron/ CMU?

    Much appreciated.

    Leave a comment:


  • Tscarborough
    replied
    Re: Stucco Over Angle Iron

    You will need to apply lath over that area, and lap it well onto the CMU.

    Leave a comment:

Working...
X