web analytics
installing giardino 70 on base - Forno Bravo Forum: The Wood-Fired Oven Community



Dome Installation Video - Casa / Premio / Modena


For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.


If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

installing giardino 70 on base

  • Filter
  • Time
  • Show
Clear All
new posts

  • installing giardino 70 on base

    Need help, please. I am installing my Gia70 on a metal framed base and i am not sure about the details installing on a flat metal base, as well as where to use the mortar. here are a list of questions:
    1) do i adhere the base insulation to the flat metal base?
    2) do i cut the bottom insulation to the footprint of the dome?
    3) if i level the floor tiles in a bed of sand, what if the tiles have any gaps between them?
    4) it says to seal the dome and landing with ref. cement. is this cement placed between the dome and insulation.
    5) it appears to have some gap between the interior perimeter of the dome and the perimeter of the floor tiles. do i fill that with sand? mortar?

    Thanks very much for any and all help. looking forward to installing this thing. i apologize if this should have gone in the modular threads, i just wasn't sure.


    Jamie Crane