web analytics
Angle meter - Forno Bravo Forum: The Wood-Fired Oven Community



Dome Installation Video - Casa / Premio / Modena


For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.


If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Angle meter

  • Filter
  • Time
  • Show
Clear All
new posts

  • Angle meter

    Hi all,
    Just following a recommendation from a forum subscriber.

    I'm using this Angle Meter, borrowed from my next door neighbor (and pretty much ruined by now) to check my brick angles as I place them. I've been working without shims, except for the occasional time when I tamp the bricks down too far while setting them, then I use the shim as a wedge to boost it back up again.

    By this method, at least so far, I'm able to hand butter the bricks with mortar and do away with a grout bag. It works really well.

    I have no idea where to buy something like this. My neighbor can't remember where he bought it. Try Google????
    Everyone makes mistakes. The trick is to make mistakes when nobody is looking.


  • #2
    Re: Angle meter

    I think I got mine from Home Depot or Wal-Mart.
    Oven Progress
    Bread Photos
    Oven Stand Thread


    • #3
      Re: Angle meter

      I was a carpenter for over 10 years and I never saw one of these before.

      Nifty gadget!

      Would of been handy to have for carpentry and oven building!

      Here are a couple links to purchase one.

      Find Angle Finder Magnetic Base, 4 1/8" and other Measuring Tools at Aubuchon Hardware

      Central Tools Angle Finder with Magnetic Base (CEN6494)

      My thread:
      My costs:
      My pics:


      • #4
        Re: Angle meter

        Also called a goniometer at least in medical practice.


        • #5
          Re: Angle meter

          Here's the exact one at tool barn

          L.S. Starrett Angle Meters | ToolBarn.com



          • #6
            Re: Angle meter

            Just a note. I've used Starrett measuring tools for years, and they are among the best and most accurate out there. Don't have the angle gauge, though I probably should, but I do have a two foot and four foot level from them, plus a miter square, a tiny box square and some other stuff. Highly recommended.

            "Made are tools, and born are hands"--William Blake, 1757-1827


            • #7
              Re: Angle meter

              Originally posted by BaconGrease View Post
              Also called a goniometer at least in medical practice.
              Isn't a goniometer for measuring the size of the patient's... ?


              • #8
                Re: Angle meter

                Originally posted by maver View Post
                Isn't a goniometer for measuring the size of the patient's... ?


                • #9
                  Re: Angle meter

                  Oooohhhhh..... Nifty!
                  "He is no fool who gives what he cannot keep to gain what he cannot lose." - Jim Elliot

                  "Success isn't permanent and failure isn't fatal." -Mike Ditka


                  • #10
                    Re: Angle meter

                    Inclinometer - not sure about medical applications, although sounds like there could be some.

                    Can be had on eBay here for £15-£25 depending on the version.


                    "Carpe diem." - Fish of the Day (The Uxbridge English Dictionary)