Problem with high hydration dough shaping

[tgm]

Re: Problem with high hydration dough shaping

tomtom,

Glad it worked for you. We have found the same results. Nice supple, silky smooth dough that stretches beautifully, holds its shape well and creates a perfect, in our opinion, finished product. Not to mention the fabulous taste.

Tom in PA

[tomtom]

Re: Problem with high hydration dough shaping

Tgm, I followed your 8hr room temperature rise. Worked great. I have been doing a 24 hr rise in the fridge. The dough was at 65% hydration. The 8hr room temp rise seemed to possibly allow for better stretching. Thanks
Tom

[thezaman]

Re: Problem with high hydration dough shaping

tom ,i was at keste last week a great pizza lively restaurant ,and roberto is a really nice passionate man. can you recommend a mixing schedule for a kitchen aid mixer?

[tgm]

Re: Problem with high hydration dough shaping

The article was referring to is located following web site

Learning How to Make Neapolitan Pizza from Keste's Roberto Caporuscio | Slice Pizza Blog

7. Bake the dough for ten minutes before any toppings come into play. Now add the tomato sauce and cheese, etc. If you baked the whole shabang at once, the cheese would turn to water and the meats would dry out. So don't. At Kest?, each pie only bakes for about 55 seconds because it's so fracking hot in there. The dude on pizza peel duty boasted his PR: "45 seconds!"

Let's do the Paul Harvey's.....'and now the rest of the story' ...
I read the article and it cleary states..."The recipe, adapted for normal, nonrestaurant kitchens, follows."

That is maybe at best a 500 deg. oven with a stone.

This is a WFO forum and if anyone left a pizza in any WFO for 10 min. you would have nothing but ash left.

The recipe and technique are fine just ignore the time element.

Good Luck,

Tom in PA

[fxpose]

Re: Problem with high hydration dough shaping

I can't comment about the dough but I must say the way you set up your oven and deck look fantastic. The shape and color on that oven are very cool and just fits right in its surroundings.

[dregnier]

Re: Problem with high hydration dough shaping

The article was referring to is located following web site

Learning How to Make Neapolitan Pizza from Keste's Roberto Caporuscio | Slice Pizza Blog

7. Bake the dough for ten minutes before any toppings come into play. Now add the tomato sauce and cheese, etc. If you baked the whole shabang at once, the cheese would turn to water and the meats would dry out. So don't. At Kest?, each pie only bakes for about 55 seconds because it's so fracking hot in there. The dude on pizza peel duty boasted his PR: "45 seconds!"

[tgm]

Re: Problem with high hydration dough shaping

I don't know what article you are refering to but there has never been any 'pre-bake' at any of Robertos establishments. We are running our oven the same as Robertos and we average 60-90secs tops since we have starting making pizza.

Tom in PA

[dregnier]

Re: Problem with high hydration dough shaping

I have checked out Roberto's article and I'm not sure how interpret step 7, interesting pre bake the dough? any comments?

7. Bake the dough for ten minutes before any toppings come into play. Now add the tomato sauce and cheese, etc. If you baked the whole shabang at once, the cheese would turn to water and the meats would dry out. So don't. At Kest?, each pie only bakes for about 55 seconds because it's so fracking hot in there. The dude on pizza peel duty boasted his PR: "45 seconds!"

[tgm]

Re: Problem with high hydration dough shaping

Tom,

Thanks for posting, I read a bit on Roberto and pulled up some pictures of his crust as Keste...looks good. I'm going to give it a shot next time I fire the oven. Do you work it in a mixer or by hand? How much?

Hand mix only for a 10 dough ball batch which is what the above recipe will give you using 275g balls, just right for a nice size pizza.
I hand knead for 17-20 min, divide and put in a plastic container to room temp proof for 8 hrs. According to Roberto and our experience over the last 5 years, this seems to work the best. I did refrigerate the leftovers as I stated above for use today and it was amazingly good.

Good Luck,

Tom in PA

[splatgirl]

Re: Problem with high hydration dough shaping

I do what texassourdough said with flour on a sheet pan. I use a 1/2 sheet pan with a 1-2c. pile of flour in one corner. I dip the entire ball in the flour before I start to shape and try and keep as little flour as possible on the rest of the pan. If I've gotten too much on or under the dough during shaping I pick it up and flop it around once or twice between my hands to shake off the excess before putting it onto my peel. The sheet pan itself makes for a nice, self-contained dough prep area and is easy clean up.
I think picking up the round and letting it stretch that way takes a lot of practice and very quick hands. Watch some of the youtube videos of the pizzaiolos doing it and you'll see what I mean.
Does your dough pass the windowpane test before you set it to ferment? Maybe try letting it knead for a few minutes longer and see what that gets you. With very wet doughs, it seems like it is almost impossible to over-develop the gluten especially with that long of a timeout between mixing and shaping.
Or maybe you're just trying to get it too thin/big! I like it fairly thin, and with a ~280g. ball I get about a 12" round. Anything bigger than that has a tendency to go wrong once it gets ingredients on top of it.

[shuboyje]

Re: Problem with high hydration dough shaping

Tom,

Thanks for posting, I read a bit on Roberto and pulled up some pictures of his crust as Keste...looks good. I'm going to give it a shot next time I fire the oven. Do you work it in a mixer or by hand? How much?

[tgm]

Re: Problem with high hydration dough shaping

It yields the best crust I have ever had. If you want big airy bubbles, you got it, just don't put anything on that area and bubble it will. We just used the 4 dough balls leftover from yesterday for lunch today and the results after refrigeration overnight are almost the same.
Considering Roberto's pizza was just voted the best Neopolitan in NYC at his new Bleeker street establishment, Keste, I really don't think i should tinker with a successful recipe that garnishes this type of award.
Play all you want, I am sticking to what works for me.

Good Luck,

Tom in Pa

[shuboyje]

Re: Problem with high hydration dough shaping

So if my math is correct you are using about 56% hydration? What type of crust does it yield? I ask because I have found 60-65% to be a bit low for what I want and made mine 70% hydration this weekend with the best results yet. I am trying to get big airy bubbles in my crust, and although I didn't get the result I wanted at 70% I got by far the closest to it with many big bubbles.

[tgm]

Re: Problem with high hydration dough shaping

I find all these discussions about hydration very interesting but for 5 years now we have been using the recipe as we were taught by Roberto and it has never failed us and our pizza crust ranks up there with the best we have ever tasted.

They say the proof is in the pudding, but here the proof is in the Caputo. Never used any other flour, never want to. We just use the recipe as taught by the master, 1L warm water, 1.78K flour, 3g fresh yeast and 1.5oz salt, that's it. It works perfect everytime with 8hr room temp rise being the best.

We have yet to veer from the recipe and have been rewarded with perfect pizza everytime. Rises perfectly, shapes perfectly and cooks to that absolute goodness in a very hot, 900F, oven.

Had I not learned what I know today from master Roberto, the discussions may lead me to not even try making my own pizza. It's not that difficult at all. It's all in the ingredients.

Now back to my dough for today,

Tom in PA

[DrakeRemoray]

Re: Problem with high hydration dough shaping

I love the green oven! Very original and great looking!

I am always suprised at how thin I can make the dough without it tearing. It sounds like you and I use a similar dough preparation (you don't mention a bulk fermentation and I don't use one).

Is the dough easy to handle other than the shaping? Ae you having problems with sticking?

You say you are getting sauce burning through, does that mean that you do not have a hole when it goes into the oven, but that one forms when you turn the dough?

Maybe you are turning the dough before it has had time to set up in the oven?

My only other thought is acutally over mixing...I use a spiral mixer (SP5) and start with cold ingredients (ice cold water) and work to a temp of (I think) 65 degrees (I am at work now, so I don't have my recipe). Then it goes straight into small lightly oiled containers in the fridge. It is not super smooth and window-pane like at that point, but the retardation takes care of that in my experience.

I do tend to pick it up and stretch it slightly and it gets very thin. Even the thinest spot poof nicely in the oven, and the only time I get holes is when it sticks to the peel on the way in the oven or sometimes if I put way too many ingredients on it.

Could you be over-topping? You should be able to see the dough through the sauce....

At least the practice is fun!

Drake