Casa2G 100 build

[willruff425]

Re: Casa2G 100 build

Gettin' some practice in making pizzas..

[willruff425]

Re: Casa2G 100 build

Had to get a Hot water sink installed on the trailer... No Problem! called in a buddy of ours and voila!

[willruff425]

Re: Casa2G 100 build

Looking good. You'll be cooking in no time.

We've actually been cooking for a week now. this project started in February

[NCMan]

Re: Casa2G 100 build

Looking good. You'll be cooking in no time.

[willruff425]

Re: Casa2G 100 build

Ok arch looks good! Now its time to clean the baby up and start the curing process.. This should be good!

[willruff425]

Re: Casa2G 100 build

So we cut down the arch and decided to chisel out the stucco work down to the actual oven dome. Just a little bit of mortar here and there and we put the arch back into place permanently. Next we put stucco back into the gaps around the arch and voila!! looks nice to me.

[NCMan]

Re: Casa2G 100 build

Looking good!!

[willruff425]

Re: Casa2G 100 build

Finished mortar & grout! looking at the front of the oven we realize the arch needs to be cut down a bit... oh well,

[willruff425]

Re: Casa2G 100 build

Finishing up the mortar and grout work!

[willruff425]

Re: Casa2G 100 build

Next we worked on selecting some tile for the base and the mantel. We also had to build a mantel or deck for the oven. Next up mortar and grout!

[willruff425]

Re: Casa2G 100 build

Applied the stucco base and let it dry over night.. Then we added the stucco finish.. Coming along nicely at this point!!!

[willruff425]

Re: Casa2G 100 build

Getting the oven ready for stucco at this point. Also went and picked up a clay chimney flute. Hard to find in this area! but, I got one. ... Now! to put on the Stucco Base!!!!

[willruff425]

Re: Casa2G 100 build

spent a few days shopping for cooking supplies and stucco. If you have any questions about where to get supplies in seattle area please let me know.

[willruff425]

Re: Casa2G 100 build

Made sure everything fits correctly and put the high heat mortar on the dome. we were starting to get excited at this point.. Lots of fun!!1

[willruff425]

Re: Casa2G 100 build

Oven showed up boxed tight no damage or issues. So we got to work on the base of the oven. Set some rebar and poured some cement. It went as well as expected but we did measure wrong on the first pour and had to increase the size of the base.