If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Here's some pics today, it shows the new fascia arch, the tile work around back..still have to grout that. The place is still a work in progress mess but figured I'd let you know where I'm at now. Wy wife and I are playing with the painted scrolls that are going to be part small stone on the dome. Let me know what you think
Dave
Thanks for the compliments! Our supervisors say they will not take bribes or compliments...just pizza! What is great about this project is we can really have fun with it, there have been a couple...hmmm nah let's do this color or completely started over on something. You then get to see what works (in our minds) and what doesn't. I know our taste is a little different, but we took cues from everyone on here. It really is a great source of info. I have to take some current pics at where we are at now. Hopefully today!
Really looks good. The general has a good eye for shape! I love the shape of your enclosure. I also like the firepit concept. Maybe in my next house... Your counters are lovely- I like the color a lot. The whole thing looks very, very nice.
Here are some pics with the lights and the concrete tops in. I also ran a plug and a switch for the lights underneath the left concrete top. I will have more pics later of the secondary arch and further project...calling it a night
David
Here's some of the insulation blanket layer and wire mesh. Then I coated it with a scratch coat of plain stucco to even things out before starting the insulation vermiculite layers.
I had to put in the pics of the dome, what thread would be complete without it! Here are some of the floor and the dome inside. I liked the herringbone pattern for the floor, I put the floor down first and then locked it in on the side with the first course.
As the list grows...these are some pics of the entire area now including the posts set for the pergola. We poured the "bowl" for the fire-pit. I dug three more footings underneath the bowl to stabilize it. I poured the bowl about 6" thick and hand formed the slope. We thought it would be a good idea to make a bowl to sweep up the ashes. I also drilled a "rain" hole that led to another perforated pipe to drain the rain water. I acid stained the bowl too, even thought It'll be mostly charred black. The fountain wall my wife picked out some stones I cut, drilled and mounted to the wall. I ground a groove in the stone with my wet polisher on top to allow the water to flow. Of course I also finished the dome of the pizza oven. It has the first layer of vermiculite on it. I later changed out the smaller flue for a larger one. It wasn't drawing as well as I would have liked.
Christo,
Thanks, I really like how you finished yours with the tile accents. Originally I just wanted the pizza oven...but my "General" turned it into everything else. And.......the list keeps growing.
I thought buying a solid pond liner would be easier that getting a tarp liner. Just dig a hole fill the dirt around it. Sure no Prob..well it was kinda a pain in the A*($! Getting it level and filling in the dirt around, filling it halfway and leveling more, wetting the dirt around it...tamping, leveling. It took me a couple hours of messing with that to get it right. I put in a overflow perf pipe to carry any excess rain water away. I also have pics of the fire-pit hole. The little red guy is excess concrete. We called him the fire-god and asked him to bless our fire pit
These are of the walls with some more stucco layers and the adobe style rafter posts. The plumbing is in the for the fountain in the wall and the beams are set on the oven.
These are of the Vermiculite mix and the 1st layer of stucco over the walls. I added cream layer of straight portland over the vermiculite layer to smooth and level things out a bit.
Les,
Caught your post after I posted the last pics, I cast in angle iron into the slab and the set the wood beam underneath to add support. BTW I was really impressed with your dome construction.
Dave
Leave a comment: