Broken/Misdirected Links

[JRPizza]

The forum is slowly recovering from the "upgrade", so I wanted to start this thread to help the moderators find/fix damaged links. I think I know that links to the photo gallery won't be fixable, but if you find others please post them here and Mitch and Co can hopefully fix them.

[JRPizza]

Broken link in post #1 at the link below. Clicking on second link gives message "Invalid Page URL. If this is an error and the page should exist, please contact the system administrator and tell them how you got this message. "
http://www.fornobravo.com/community/...e-vent?t=13679

[JRPizza]

In post #2 of the topic below, the link is supposed to take you to examples of mosiac, but instead is misdirected to a thread about hearth insulation
http://www.fornobravo.com/community/...icing-our-oven
Also a broken link in post # 7 of same topic.

[JRPizza]

Link in post #4 is supposed to go to Ken524s construction thread, but misdirects to "Italan culture and Pizza Ovens" [sic]
http://www.fornobravo.com/community/...n-or-bottom-up

[JRPizza]

Misdirect in post #3
http://www.fornobravo.com/community/...-mosaic-finish
Supposed to be link to cool oven but directs to"Which brick oven to build?

[admin]

Broken link in post #1 at the link below. Clicking on second link gives message "Invalid Page URL. If this is an error and the page should exist, please contact the system administrator and tell them how you got this message. "
http://www.fornobravo.com/community/...e-vent?t=13679

Hi JR,

The misdirect issue has been resolved. We ran a script to correct all the broken links ending in ####-####.html
Eg.: http://www.fornobravo.com/forum/8/gu...ld-7051-4.html

The bulk re-direct process initially used for re-directs was dropping the dash and not recognizing the update. We simply ran a script to identify errors and update the link as needed.

We'll keep this thread open just in case anyone encounters the issue again so that we can investigate.

Mitch

[david witson]

hopefully fix them.

[JRPizza]

I was looking at door designs and ran into another broken link - it's in post #15 of the thread linked below. There are a few other bad links in the post, but they were not hosted by Forno Bravo so I know they are out of your control.
http://www.fornobravo.com/community/...ted-steel-door

[admin]

Thanks, JR, I've added it to the list!

Mitch