The adventure begins

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • backinoz
    replied
    Re: The adventure begins

    Haven't posted for a while. The silly season has given me a variety of distractions so progress is not where I would like it at this stage. Have got up to course 7 with the next task to start to tie into the dome arch.

    Leave a comment:


  • backinoz
    replied
    Re: The adventure begins

    Course 2 Completed tonight but two bricks short. Back to 5th grade for counting lessons I think.
    These couple of photos show the center board I have made out of structural ply in three pieces (so I can get it out at the end). The pivot for my indispensable tool is mounted with the ball joint center level with the top of the soldier course.
    The plan last weekend was to spend this weekend laying bricks but I guess Ill be cutting bricks instead.

    Leave a comment:


  • ThisOldGarageNJ
    replied
    Re: The adventure begins

    Oz,,
    Your off to a great start... Looks nice and neat.... Keep up the good work

    Cheers
    Mark

    Leave a comment:


  • backinoz
    replied
    Re: The adventure begins

    That was FUN. Put in the soldier course for the dome tonight. It went very well and a lot easier than I thought it would be. The mortar from Claypave was like spreading butter mixed with sand and after the first 5 or so bricks got into a rhythm.
    With a bit of luck and some more evening progress I might still meet my first pizza on 22 Dec target. Hard to keep the silly season out of the way at the moment though.

    Leave a comment:


  • ThisOldGarageNJ
    replied
    Re: The adventure begins

    Hey Oz,,
    Your floor is looking great, Nice cut work,,

    Cheers
    Mark

    Leave a comment:


  • Alter ego
    replied
    Re: The adventure begins

    Originally posted by backinoz
    It was a refreshment in algebra, solving simultaneous equations an trigonometry
    This sound a little like when I was building my inner arch entry into the dome. The cord (ie the with of the entry) was 455mm. The distance from the cord to the circumference of the arch was 75mm and I needed to know the radius or the arch to draw the template. I solved this problem with a piece of string but curiosity got the better of me and I wanted to know how to solve this mathematically. I asked everyone but no one was able to give me a formula straight away. My neighbour eventually Goggled it as he was also frustrated and eventually we came up with a mathematical solution. I won?t repeat the equation as it was too complicated but I am happy to lend my bit of string to anyone who also needs to works this out.

    Paul

    Leave a comment:


  • backinoz
    replied
    Re: The adventure begins

    Another good weekends work. Spent the weekend trimming the floor bricks to fit flush with the template and cutting the soldier course bricks and course number one.
    Cutting bricks was reasonably simple although my saw has a cut depth about 7mm too short so every cut was done in two steps.
    Have gone for a taper on one side of the soldier course.
    For course Number 1 went for the three cut option. First two cuts create a parallelogram and the third cut creates two trapezoids which I then tapered at a ~6 degree angle for the dome. Note if you tapered the brick first you would need four cuts instead of three and waste more brick. the bricks are about 120mm on the long edge and 98mm on the short edge and a ~5.4 angle for the three cuts.
    It was a refreshment in algebra, solving simultaneous equations an trigonometry. It took me longer to work out than it used to.

    Leave a comment:


  • trockyh
    replied
    Re: The adventure begins

    backinoz,

    Your build looks great! I hope mine will look as good. Hope to get my forms set for the base today, but rain is coming in this afternoon.
    Looking forward to seeing your progress. Thanks for the pictures.

    Tom

    Leave a comment:


  • ThisOldGarageNJ
    replied
    Re: The adventure begins

    Nice indespensable tool oz...

    Dont forget to use wedges under your arch form so you can take it out easily after the form is done......

    Cheers
    Mark

    Leave a comment:


  • backinoz
    replied
    Re: The adventure begins

    Thanks for the encouragement.
    Since my last post I have
    • made up my indespensable tool
    • cut out the template for the inside oven dome and door from structural ply left over from the formwork
    • purchased bricks from a local gardening center left over bricks from their oven project.
    • purchased sheets of calcium silicate board insulation for the floor from local pyrotek distributer
    • cut the bricks for the oven floor
    • cut and mounted the insulation board


    Going good so far although starting to count the weekends between now and first pizza deadline on 22 dec 09.

    Leave a comment:


  • nissanneill
    replied
    Re: The adventure begins

    backinoz
    going great! Get your vermiculite insulation down (quite unusual to mix). I used a flat bladed fork to mix mine (see the pics within my build), for tips and tricks, get it nice and level and smooth and flat and experience less troubles bedding down your hearth bricks. Leave for a week, time to cut all or most of your bricks and 2 days for your dome! No joke, it's a breeze, longish days but very achievable. You will need to cut the odd special cut around your arch and maybe a narrower brick to maintain the better correct bond but it is surprising how quick you get each course done.

    Get into it and sit back and enjoy.

    Neill

    Leave a comment:


  • ThisOldGarageNJ
    replied
    Re: The adventure begins

    "If its worth doing its worth doing once"
    Only problem was that I finished to early to relax with a beer
    I agree 100% to both quotes
    Nice work oz, you are well on you way

    Cheers
    Mark

    Leave a comment:


  • backinoz
    replied
    Re: The adventure begins

    Top slab was not as hard as the base slab. 7 bags of concrete and just over 4 hours work. Trick was starting early so not to have to work thru the heat of the middle of the day. managed to get a bit of a cool down with a short bit of rain about half way thru but no consequence.
    Only problem was that I finished to early to relax with a beer.

    Leave a comment:


  • backinoz
    replied
    Re: The adventure begins

    Another good day of work. Finished the formwork on Saturday.

    Formwork was set up using some 12mm structural ply around a frame. This was off set from the brickwork using some 2"x3" which I got level and square around the outside.
    Reinforcing was done with 6x2m lengths of 12mm ReBar as the base and a 6mm mesh over the top and tied together. Over the lintel I put a 75x75x6mm angle and a piece of 75mmx10mm flat bar. I think its an overkill but the old saying goes "If its worth doing its worth doing once"

    Leave a comment:


  • Johnny the oven man
    replied
    Re: The adventure begins

    Originally posted by backinoz
    More progress. Going like clock work so far but anybody can build a brick wall I guess. Have built up the base by 5 courses from the slab. Now just over 840 mm high. I don't think I quite got the 10 mm of mortar between each course. Used left over house bricks so it ties in very nice.
    Used just over one bag of cement which was less than I calculated. Goes to show that maybe Murphy doesn't work on saturdays.

    Next week is Halloween so Im not allowed to make too much of a mess so I think it will be boxing up the top slab and sourcing the next lot of materials.

    Having fun. Especially enjoyed a couple of Boag's Draught after everything was finished and cleaned.
    For bricks up in the Nth, try Total Refractory Management in Slacks Crk.

    Leave a comment:

Working...