The adventure begins

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • ThisOldGarageNJ
    replied
    Re: The adventure begins

    Hey Oz,,
    Your finished oven looks great... I am seriously thinking of rebuilding my entrance like yours,, thanks for the inspiration....

    Cheers
    Mark

    Leave a comment:


  • backinoz
    replied
    Re: The adventure begins

    The adventure ends its first chapter. Have finished the oven with the exception of a finishing coat of acrylic render (need to wait 28 days for the cement render to dry) and some large format pavers.

    Have got the knack of the pizza dough the oven temperature and had my first go of bread.

    Leave a comment:


  • backinoz
    replied
    Re: The adventure begins

    Put what I hope is the final render on tonight.
    Will miss the chance to cook pizza on Australia Day

    Leave a comment:


  • ThisOldGarageNJ
    replied
    Re: The adventure begins

    Hey Oz,
    Congrats on your first of many many pizza's.. Saw the pics in your album it looks great..

    Cheers
    Mark

    Leave a comment:


  • backinoz
    replied
    Re: The adventure begins

    First Pizza 3/01/2010.
    and everybody was right tastes even better straight out of your own oven built by your own hand.

    Turned soil 10/10/09
    First brick layed 21/11/09

    Leave a comment:


  • Janine M. LeGrand
    replied
    Re: The adventure begins

    Congratulations Oz! Your work looks spectacular. Very nice and clean--shows the amount of work you put into it. Glad mine is already built or I might be intimidated--mine was "quick and dirty" construction but it works for me where I am. Yours will surely impress everyone. In no time you'll be enjoying that pizza (and well-earned beer) You'll love the taste of the food that comes out of the WFO.

    --Janine

    Leave a comment:


  • ThisOldGarageNJ
    replied
    Re: The adventure begins

    hey oz,
    Im assuming you cast your transistion ?? looks great, did you use refractory cement ?? Most importantly CONGRATS on your first fire....

    Cheers
    Mark

    Leave a comment:


  • backinoz
    replied
    Re: The adventure begins

    First Fire.
    No Pizza yet but a great MILESTONE.

    Today did final patch and inspection inside after removing the arch supports and the ply inside supporting the floor and indespensible tool.
    Mounted the vent support, and chimney.
    Put a portable heater in for 6 hours.
    Lit the first dryout fire at about 1600 for 4hours. Only a small fire fueled by my desire to go get another beer. It didnt stop the girls from cooking marshmellows (although not the way that I like them). So first food wasnt pizza like the story book.
    Got the outside top to about 50-60 degrees and have sealed it up for the night.

    Leave a comment:


  • ThisOldGarageNJ
    replied
    Re: The adventure begins

    Hey Oz,

    Congrats on closing your dome... good luck...

    Cheers
    Mark

    Leave a comment:


  • backinoz
    replied
    Re: The adventure begins

    Good days work. [LIST]
    • Finished the last keystone. Took longer than I thought but measure twice cut once (or 50 to 100 in my case)
    • Cut the last firebrick for the arch
    • Installed the arch. (had to this twice as I didnt have enough supports and it start to collapse before I got to the key)


    Looking forward to tomorrow. First fire hopefully..

    Leave a comment:


  • backinoz
    replied
    Re: The adventure begins

    Johnny
    When I finish Im going to start a blog called "Hindsight" and your point will be one of them. Spent more than half the day just doing this last course and it the smallest of them all. Probably clocked up 2-3km just going from the shed and back taking one more cut and another cut........
    In the end am happy and have a keystone that locks against all 7 bricks. Will have to climb into the oven tomorrow to see how it looks.

    Leave a comment:


  • Johnny the oven man
    replied
    Re: The adventure begins

    Sometimes it's easiest to cast the final plug with refractory castable, save a lot of cutting.

    Leave a comment:


  • backinoz
    replied
    Re: The adventure begins

    Good progress yesterday. Getting close to that last brick. Have been balancing the work with mother nature getting in to work when when the rain eases up.
    The trick now is to work out how to best fit the top keystone brick. The hole is a mix of a hexagon and an octagon.
    I got a picture of my bricksaw setup. (only a few more bricks left and that is where a majority of my time has been) Im using a table saw with a tiltable top and a 215mm diamond blade. I soak my bricks in a wheel barrow of water for ~20min and soak between cuts to eliminate dust. It may eliminate dust but not the mess. I also have a dust extraction system which works well at keeping a negative pressure at the blade but doesnt have enough guts to lift the dust (wet brick particles) into the bag so it deposits in the pipe and needs to be emptied every 30 bricks.
    I bought the cheapest blade and it has cut over 200 bricks. Every brick is tapered and all bar the arch bricks and soldier course are tapered on the end into truncated pyramids.

    Leave a comment:


  • ThisOldGarageNJ
    replied
    Re: The adventure begins

    hi oz,,

    Your joints are nice and tight... looks great.. I wouldnt worry about the neatness.. you cant see it when theres a fire inside..
    cheers
    mark

    Leave a comment:


  • backinoz
    replied
    Re: The adventure begins

    Boxing Day Progress was to tie in and lock the course over the arch.
    Wasnt as neat as I would of liked it but is nice and tight. Used some fireclay to fill in some of the small holes.
    Finished course 8 and 9 today and cut the bricks for the arch.

    Leave a comment:

Working...