Announcement

Collapse
No announcement yet.

Ratio Entry/Dome - Height & width

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ratio Entry/Dome - Height & width

    Hello Guys,
    in the forum we’re talking about the ratio entry height/ dome height should be around 60-65%.
    Is there also a recommendation for the width ratio?
    In addition, why the vent arch width is always a little big bigger then entry arch width?
    thanks
    Marco

  • #2
    Marco, what size of oven are you thinking of building? I had done some searches for width and just ended up going with what was recommended in the FB plans. Actually I had to interpolate as I built a 39" oven and the plans are for 36 and 42". Your other question is easy - the vent arch is usually a little bigger so there is an edge (reveal) of the inner arch showing when you are done that is useful for a door to seal against.
    My build thread
    https://community.fornobravo.com/for...h-corner-build

    Comment


    • #3
      Thanks for the answer!
      I’d like to build something between 35-38”,
      so the FB plan says 19”-20”

      Comment

      Working...
      X