Raffy's WFO Build

[Raffy]

Re: Raffy's WFO Build

My inner pyro is happy for today. His hunger for flame has been satiated.

[Raffy]

Re: Raffy's WFO Build

I thought I was a Pyro....but until I built a really big fire in my oven, I was out of your league.

Goes to show we all have a hidden pyro within us. BTW, thanks for the info on the chimney cost. I was afraid it was going to reach that high. I'll be searching for cheap durable material for the chimney after holy week.

The upcoming Easter fiesta in Camsur must be something to look forward to. What I wouldn't do to be there now, but, I imagine the roads leading out of Manila are all congested.

Have a blessed weekend.

[Raffy]

Re: Raffy's WFO Build

Meh, I tried to get the Inswool all dried out before filling in the vermicrete, then tried to dry out the vermicrete before doing a thin parge layer of concrete...and NOW I have to dry the whole thing out again before I go full-on with the water-resistant stucco. It's been very very wet this week. I think I'm basically back to square one.

I agree. Its an endless cycle of keeping new concrete hydrated then eventually drying it out. It really tests my patience and discipline. I keep reminding myself good things come to those who wait. And, the reward is PEEEEZAAAH

[lwood]

Re: Raffy's WFO Build

I thought I was a Pyro....but until I built a really big fire in my oven, I was out of your league.

[kebwi]

Re: Raffy's WFO Build

Meh, I tried to get the Inswool all dried out before filling in the vermicrete, then tried to dry out the vermicrete before doing a thin parge layer of concrete...and NOW I have to dry the whole thing out again before I go full-on with the water-resistant stucco. It's been very very wet this week. I think I'm basically back to square one.

[Raffy]

Re: Raffy's WFO Build

Heh heh, there was a point few weeks ago when my oven looked like that, with a bald spot of insulation on the top. I did it for the same reason, to cook out the steam before sealing it up.

Beautiful entry and chimney btw.

Thanks! When I saw your beautiful arch, I modeled the semi circular shape after yours. I guess you were my inspiration when it came to the opening hehehe. I want to seal up that "bald spot" already but I have to be patient and dry out the dome properly. I'm mustering up any last shred of discipline not to go full blast on the curing fires.

Warm Regards,
Raffy

[kebwi]

Re: Raffy's WFO Build

Heh heh, there was a point few weeks ago when my oven looked like that, with a bald spot of insulation on the top. I did it for the same reason, to cook out the steam before sealing it up.

Beautiful entry and chimney btw.

[Raffy]

Re: Raffy's WFO Build

Hey Mark,

I will most probably do it that way. It seems to be the most simple and cost effective way to do it.



Well, I put on the stucco already but I left the top portion of the dome unfinished to let any steam flow out freely. Once I feel the oven is dry enough, I'll top it off with the perlcrete and a final layer of stucco.

Can't wait to get cooking.

[Raffy]

Re: Raffy's WFO Build

Looks good! I am not in the closet, I am a certified pyro.

Hahaha! Amen, Brother, Amen!

[Tscarborough]

Re: Raffy's WFO Build

Looks good! I am not in the closet, I am a certified pyro.

[ThisOldGarageNJ]

Re: Raffy's WFO Build

Hey Raffy,
If you can find the cast iron pipe,, you can probably have some heavy duty tabs welded on pretty cheaply and cement in some anchor bolts (to the top of the chimney) to hold it down,,

[Raffy]

Re: Raffy's WFO Build

We just finished installing the insulation today. I used 1" blankets so I had to wrap it twice then tied it down with some chicken wire. Some perlcrete will go on tomorrow and stucco finish after that.

I've been lighting newspaper fires at regular intervals to help the drying and curing of the dome. Dino will be happy to know that the chimney's draw is good and steady thanks to his help.

Easter Sunday might be the day I light the BIG ONE which leaves me the whole week to do the curing fires. I'm afraid I'm a closet pyromaniac. All I can think about is lighting fires!

[Raffy]

Re: Raffy's WFO Build

Thanks for the suggestions, Guys.

Why not have a stainless flue fabricated. Mine wasn't too expensive.

Hey John, would you mind telling me through PM how much the fabrication cost you? How did you attach it to the chimney?

Mark, thanks for your suggestion. You gave me a good idea. I might go with the square pipe. But, that raises the same question. How do I anchor it to the chimney?

I am with Mark- a length of 6" cast iron pipe. You could mount it on a flange on top of the chimney. It would oxidize in the weather and look cool. It is also very economical and readily available. Nice work on the chimney.

I agree, Eric. I think it would give the oven that rustic look, no pun intended. How do you suggest I mount the flange?

[ThisOldGarageNJ]

Re: Raffy's WFO Build

Hey lwood,
chances are that if your house was built before the 70's you would have a cast Iron drain pipe waste system,,, It was replaced by PVC,, Most people prefer the cast Iron as there is a lot less plumbing noise involved...

Raffy,
Im not sure about the phillipines, but here in the U.S. pipe is available many different ways, even square,, cast iron, steel, stainless, and so on,,

Cheers
Mark

[lwood]

Re: Raffy's WFO Build

Hi Raf,
I'm laughing cause what is readily available in the US may not necessarily be so here in the Philippines. Never seen a cast iron drainage pipe here. Why not have a stainless flue fabricated. Mine wasn't too expensive.