Announcement

Collapse
No announcement yet.

building my new 42 inch oven

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • building my new 42 inch oven

    hi here is how to build a 42 inch oven in 45 seconds (turn sound on)

    http://www.youtube.com/watch?v=YGcBcLFlFM0

  • #2
    Re: building my new 42 inch oven

    This video contains content from INgrooves, who has blocked it in your country on copyright grounds.
    Tried to look at your video, and it was blocked.
    My geodesic oven project: part 1, part 2

    Comment


    • #3
      Re: building my new 42 inch oven

      42 inch is inside diameter, standard plans from forno bravo
      they are 2nd hand fire bricks same size as regular house bricks
      I used nearly 130 bricks in 1/2. that was sides dome and arch only not floor. The floor is 14 (300mm x 300mm) fire brick tiles cut to size b4 adding sides
      Last edited by shark; 10-12-2010, 09:52 PM. Reason: more info

      Comment


      • #4
        Re: building my new 42 inch oven

        Video works Dmun ! Karangi dude has watched it

        Comment


        • #5
          Re: building my new 42 inch oven

          yes layed on a mix of 50/50 sand and fireclay

          (make fireclay dust) ? put off cuts in cement mixer and mix they put your music on loud as mixer mixing bricks is very loud.

          The Tiles are 2 sizes 38mm thick or 50mm thick, I chose the 50mm.

          once layed on bed and sides are fixed in angle grind any high spots on joins

          Comment


          • #6
            Re: building my new 42 inch oven

            Video can't be seen in the USA. Those who can see it are in Australia

            Comment


            • #7
              Re: building my new 42 inch oven

              Confirmed on the blocking.

              "This video contains content from INgrooves, who has blocked it in your country on copyright grounds."

              If you notice, it says 'country' and Karangi Dude' is from Australia.
              My oven (for now):
              http://www.fornobravo.com/forum/f43/...ven-14269.html

              Comment

              Working...
              X