I started my own thread, realizing that guilt was overcoming me from highjacking someone else's thread. I also want you guys to know how painfull it was (3 hours) using the stand up tamper for the side area, the type that pounds into the ground. I only weigh 190 and my body was spaghetti at the end. It did the job, the ground was solid. I then finished with another foot of soil and will not weight for the next storm to pass the sierras before tamping down (with the flat square type) again. I also decided to remove one layer of retaining wall. Now comes confirmation of the design of the oven area, to house the oven and counter area.
Uno, you using CAD when you post some of your design, or remedies for people? If so, I may want to get a moment of your time (if it's ok).
Acoma.
Uno, you using CAD when you post some of your design, or remedies for people? If so, I may want to get a moment of your time (if it's ok).
Acoma.
Comment