Wollongong NSW Australia

[nissanneill]

Re: Wollongong NSW Australia

Hi Nodison,

Where do you hail from?

I'm just south of Adelaide.

How many ovens have you built and is there pics on here of your oven?

I have built one completely, finished 2 others and just knocked back one to build today. Have a guy who gets me to do things and then won't pay, so now he is off my books! My build is on this forum, just click on the link on the bottom of this posting. You can also click on my name and go to the Statistics, all of my threads started are listed which includes my door(s), outdoor kitchen and a host of other things. A good way of finding out what a member contributes to the forum.

I haven't made my door yet but I'm thinking of a wooden door I can get hold of a slab of Ironbark which is a hardwood gum tree over here and make a door from that. Ya reckon that would be ok or is soft wood better?

You will need to insulate the door otherwise you will simply char it or burn it.

Good to see that your curing is working. Don't increase the temperature until you can see that the moisture escaping is almost gone and then only slowly increase the temp up to 500˚C which is then ready for 1 minute pizzas. You will b able to use the heat within your oven already to cook (or dry) fruits, veg, meats (jurkey) and even your next firing firewood.

Cheers.

Neill

[brickie in oz]

Re: Wollongong NSW Australia

and there isn't a crack to be seen.

Luckily for us you've got pants on.....

[nodison]

Re: Wollongong NSW Australia

Hey Neill,
Just to let you know I took your advice and brought a 2 ring LPG gas ring I set it up in the oven about 4 hours ago and have been keeping a close eye on the temperature with my infrared thermometer. At the moment the very top of the dome is now up around 224F floor is around 112F. I can see where the moisture is coming out around the top of the dome on the outside, and there isn't a crack to be seen. So at this point I'm pretty happy.
Here are a few more pics.
Catch ya later
Nodison

[nodison]

Re: Wollongong NSW Australia

Hey Neill,
Thanks for the welcome.
Where do you hail from?
I did use the high temperature dry mix mortar, maybe I might let mine stand for another week before trying to cure it, let it dry out a bit more.
If I do build another one or have to rebuild this one I will now do 2 things differently, first is to acquire a brick saw to have on hand 24/7 the second is mix my own mud.
How many ovens have you built and is there pics on here of your oven?
I haven't made my door yet but I'm thinking of a wooden door I can get hold of a slab of Ironbark which is a hardwood gum tree over here and make a door from that. Ya reckon that would be ok or is soft wood better?
Catch ya
Nodison

[nissanneill]

Re: Wollongong NSW Australia

Hi Nodison and welcome aboard.

am I able to attach more to the next thread

You sure can, just keep posting with the max 5 pics until you have your build covered.
Go ahead with your curing but if you used the refractory adhesive to build your oven, then go very slowly as most other members (as you seem to recall) have cracks in their ovens.
I will never use these adhesives but use the poor man's mortar as mine was cured in a couple of days and has no cracks except for the outer render layer out over the superwool blanket and 3" vermiculite.
You could also put in a small radiant heater or a lpg gas ring for a couple of days to slowly increase the oven temp and drive out much of the moisture.

Cheers.

Neill

[nodison]

Hi everyone. I have just finished my 42" Pompeii oven from the plans downloaded from Forno Bravo. I sourced all my materials from a local refractory company. I purchased the materials, got them all home and still hadn't figured out where I was going to build it, I had an idea but wasn't sure if it would fit, so I made a template of the outside diameter of the 42" oven and tried it to see if I could squeeze it in, it fitted (see picture) so construction began in July this year. First the bottom slab, then for the block work I used Hebel blocks, which are light weight blocks you cut with a hand saw to whatever shape and size needed, then just glue 'em together. Next the top slab, easy to form up, just used screws into the Hebel blocks and nothing else. Then it was as we all know, the floor, the dome, opening, vent, chimney and landing. I still have to cover it in the ceramic thermal blanket then render it with stucco, but figured I would cure it first.
I must say I have never done anything like this before, I have done small brick work constructions, around the house, but not arches and circular domes. I have enjoyed the journey so far but now after reading some of the forums on here I'm a bit scared to fire it up, even small firings for curing, thinking it might just crack and crumble into a heap on the oven floor.
I have attached the maximum number of pics to this thread, am I able to attach more to the next thread or is there some other way of putting a whole heap on at the same time?
Anyway there is so much more to talk about and heaps more pics but that will have to wait till next time.
catch ya all later
Nodison