So after many years of lurking and talking to Russell, I finally thought I would take advantage of this time at home to get on with the oven proper. I have laid the two layers of insulation and the oven floor bricks. I am struggling with the soldier course. From the spreadsheet I am cutting 5.2 degrees angle on the narrow sides of the standing bricks but this angle is clearly too aggressive. How am I to interprete the "Side Angle" column? is that total degrees? should it be 2.51 each side?
Also, am I adjusting the IT based on the "Inner Radius" column or does it remain at 22?![Click image for larger version
Name: CSMEUTAHPompeii.png
Views: 137
Size: 80.9 KB
ID: 424346](filedata/fetch?id=424346&d=1592684208)
Thanks in advance, got next week off, hoping to get some of this done...
![Click image for larger version
Name: csmeutahSoldier.jpg
Views: 273
Size: 165.0 KB
ID: 424345](filedata/fetch?id=424345&d=1592684432&type=medium)
Also, am I adjusting the IT based on the "Inner Radius" column or does it remain at 22?
Thanks in advance, got next week off, hoping to get some of this done...