If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Anyone know any good polypropylene burnout fiber suppliers in the states?
Bueller... Bueller... I have all my ingredients to cast my dome this weekend, except for the thin poly fibers. Can anyone provide me with a source, or are they really that necessary?
I guess it depends a bit on your weather, but as there is so much free water left in the vermicrete the risk of it drying out too fast is limited. Give it plenty of time to dry out though and cover it if it looks like rain.
Hi all! Just wanted to introduce myself and say what a great forum this is. So many great builds, with tons of helpful tips and tricks. I've attached some pics of my build.
I'm in Kingston, WA and am currently building a 32" oven. Plan on doing the tried and true homebrew cast over sand method. Using weep holes, a layer of mosaic tiles, 2" calsil and 2.5" firebrick puts my oven floor right at 50", which feels good to me (I'm 6'2").
I have my floor bricks, but I'm having a heck of a time finding 2" calsil board. I don't really want to do 4" of vermiculite, because that will make my floor height a bit too tall. I tried contacting DI, but no response. Anyone know of a local supplier?
Leave a comment: