When I built the WFO I had many things in mind including Pizza and Bread. My wife called Friday afternoon and let me know that we would have company for a Saturday pizza dinner. I prefer making the dough for all of the control reasons, but on this occasion I needed to outsource the pizza dough refrigerator space was going to be an issue. I?m lucky enough to have a WFO pizza restaurant locally that uses Caputo and cold retards overnight so sometimes I do cheat and pick up a few dough balls. I haven?t done anything in the WFO for a couple of months but I haven?t been sleeping I?ve been working on my bread skills. I?m better with bread but no village baker, and I started a bit late for this, but getting a better feel all the time. So far I?ve used IDY and have a pretty good feel for how it works. The one thing I haven?t done so far is to fully load the WFO with dough. The Idea of 16 to 20 lbs of dough in a single run is a bit intimidating. I have enough subscribers for the finished bread and the formula for Pain Ancient, so with the idea that the oven was going to be fully heated on Saturday night, I mixed a 8KG load of dough Friday night. I broke the dough into 1Kg portions that went into the fridge. Pizza went well on Saturday although the dough balls were not as hydrated as I?d have liked a real disadvantage of not mixing your own dough. After loading the deck of the oven with heat I shut the oven up for the night. The door thermometer indicated 825F at 10:30pm, at 7am it showed 725F. I pulled the dough at 7:30 and shaped rough logs to warm up for the next 2 hours while the oven cools. I pulled the ash and coals from the oven and cleaned it hoping that the deck temp would drop from 700 to 500F or a bit less. After swabbing the deck over the next 2.5 hours the temp finally dropped to under 500 so the dough went in the oven, and I sprayed the oven to bring the humidity up. 30 minutes later I pulled bread.
Chris
Chris
Comment