Announcement

Collapse
No announcement yet.

Oasis Rising

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DaveW
    replied
    Re: Oasis Rising

    If you still want to waterproof the chimney liner try PepBoys. Our store sells the high-temp silicone in standard caulk-gun cylinders. It is not cheap but you might also be able to get away with using a smaller tube of high-temp exhaust sealer. Both products are the same color and appear to have similar properties.

    Looking forward to more pictures,
    dave

    Leave a comment:


  • WoodchuckDad
    replied
    Re: Oasis Rising

    Thanks for the compliments. I'm working on it. Only had to put in 110 hours the last two weeks. Today I got the OSB subroof on the oven, and put the chimney cap on as well. I am not sure how my 'gasket' will work out I used some expandable firestop for the gasket since I couldn't find high temp silicone at my big box store. I then painted it with grill paint. if it holds cool..if not I'll redo it.I ran out of daylight before I could get the felt on. I have the Fabral steel roofing material in my garage waiting to instal.

    I'm gonna be doning the Thanksgiving turkey in the oven so I need to come up with a plan the next couple days.

    Leave a comment:


  • peterlyn
    replied
    Re: Oasis Rising

    WCD,
    Thoroughly enjoyed reading through your build, tonight. Procrastinator? You? Nooooooo!
    I think it's great that you are getting those pizzas cooked (while we're still having curing fires). Isn't that what it's all about?
    Weather forecasts to below freezing on Sunday here......


    Karen

    Leave a comment:


  • Tscarborough
    replied
    Re: Oasis Rising

    It isn't critical anyway, but if water is going to get in, that is where it will do so.

    Leave a comment:


  • WoodchuckDad
    replied
    Re: Oasis Rising

    Would this weekend be soon enough? Not likely I'll get to it before then. I currently have the chimney under black plastic to prevent rain from getting in. the last course of bricks I put on it hang over the edge about a half inch. I figured that would be enough.

    Leave a comment:


  • Tscarborough
    replied
    Re: Oasis Rising

    No, just go right over it, so long as you do it soon.

    Leave a comment:


  • WoodchuckDad
    replied
    Re: Oasis Rising

    poop. Though I did a good job. Will I need to remove what I have and completely redo it?

    Leave a comment:


  • Tscarborough
    replied
    Re: Oasis Rising

    Your cap is going to need some additional work. It should overhang the chimney by an inch all the way around, and needs to be at least 2 inches thick. I attached a picture showing how to form the cap, it is easy. Use scrap and screws so you can take it apart with out beating on it.

    I did a rock on the corner of my grill chimney just like yours.

    Leave a comment:


  • WoodchuckDad
    replied
    Re: Oasis Rising

    Sunday I got up early and went to the hardware store. I intended to put the subroof on but got called in early in the afternoon to work. Before I left I put the crown on the chimney and also finished most of the steel roof support.

    I have built the chimney up about 6 feet and filled the cavity with vermiculite.\\



    I built a framework of cement board to hold the concrete crown. I also wrapped the chimney in foam to leave room for a high temp silicone expantion joint.


    I think it turned out very nice. I removed the foam after it set up but didn't take a picture, since it was nearly midnight when I got home from work.

    Leave a comment:


  • WoodchuckDad
    replied
    Re: Oasis Rising

    It has been a while since I posted. Last weekend I did some work on the front of the oven and started the chimney. Today I did a bit more and since I have only about25 bricks left before I must there is nothing left to except chimney, I will start the roof work tomorrow. I'm gonna start the framing. As most of you can imagine, I am pretty excited about that.

    Leave a comment:


  • Millstone Man
    replied
    Re: Oasis Rising

    Great looking brick work. I too have had many distractions and I believe I might be the slowest brick layer ever. Good luck on the roof, can't wait to see it finished off.

    Leave a comment:


  • WoodchuckDad
    replied
    Re: Oasis Rising

    Thanks. I usually crank out 6-9 pizzas at a time. Then I have lunch made for a day or two. The teenage son can clean house on pizza night.

    Leave a comment:


  • Dino_Pizza
    replied
    Re: Oasis Rising

    Now that's a brick oven. Looks great. I really like the look of a red brick oven, very traditional.

    I've been wanting to post how impressed I am at a pic you posted 2 pages back: 3 pizza's at one time? My personal best is 2 and I find it exhausting. Then again, I don't have kids clamoring for pizza, honing my oven skills .

    Nice looking oven,
    Dino

    Leave a comment:


  • WoodchuckDad
    replied
    Re: Oasis Rising


    So close but yet so far.

    Leave a comment:


  • WoodchuckDad
    replied
    Re: Oasis Rising

    I laid about 85 bricks yesterday. I have the whole thing up about 6 feet tall and will soon be able to start my roof supports. The sides don't need to go any higher. I am definitely excited.

    Leave a comment:

Working...
X