If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
We use the oven nearly every week and that means the new house will have one as well. Coincidentally, the new house happens to have a PERFECT place for a new oven, even has an insulated chimney pipe just waiting for use. A kitchen remodel will go along with the oven build.
Can anyone spot the area just begging for an oven?
Thinking I'll make this one a bit fancier with a rounded appearance and mosaic tiles.
Decided on a different approach to building the new oven. This one is constructed entirely of welded 304 stainless steel. The only masonry is the floor, which is fire brick. The arch trim is constructed in stainless and turned with a drill press. A heat break should keep the trim at a cooler temperature.
Built a fire already, heats fast - around 1/4 the heat up time of a conventional brick oven. It doesn't have the mass to hold heat for cooking into the next day. But that's fine with me since I cook pizza and then done. Having an indoor oven that cools down quickly is less concerning, a plus.
First pizza in the oven tonight. The yeast had been dormant since end of November, it smells ok, but didnt activate. Ended up using store bought dough, which isn't nearly hydrated enough. So not the best test of the oven. Initial thoughts are good. Up to temp in 30 minutes, floor was around 800 and dome 1000. Used 1/3 the wood compared to the all brick oven. Had to keep the fire roaring, no mass to maintain oven temps. Overall better, but experience not as authentic.
Comment