Announcement

Collapse
No announcement yet.

Issues with New Forum

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Thank you, Mullins, I have reported it to our agency.

    Mitch
    Forno Bravo

    Comment


    • Pardon my cynicism, but every time I hear of an IT change or "improvement" it invariably creates more hassles. I hope the change to a new server proves smoother than the change from the old forum to the new one.
      Kindled with zeal and fired with passion.

      Comment


      • Thank you for your comment David. Our intention is to provide a seamless move to the new server and improve the performance of the Forum for the community.

        Mitch
        Forno Bravo

        Comment


        • Originally posted by fbfireoven View Post
          Thank you for your comment David. Our intention is to provide a seamless move to the new server and improve the performance of the Forum for the community.

          Mitch
          Thanks Mitch, let's all keep our fingers crossed.
          Kindled with zeal and fired with passion.

          Comment


          • Is the migration complete? I see a thread "Hello from the golden state" shows up under new posts, but is a dead link when you try to access it.
            My build thread
            https://community.fornobravo.com/for...h-corner-build

            Comment


            • JR, Yes, they just completed the migration. I am spot checking the Forum for any issues. I just logged off and the new post link worked; try refreshing your browser, but let me know if there is a problem.

              Mitch
              Forno Bravo

              Comment


              • Mitch, I was trying to upload a .jpg that I had previously successfully uploaded, and I got a message saying it was corrupted. Tried several others that should have worked and got the same message. Anybody else having this problem?
                My build thread
                https://community.fornobravo.com/for...h-corner-build

                Comment


                • Hi JR,

                  I haven't heard from anyone on this as an issue. A few people posted pictures last night. Let me know if the problem continues - you're using the camera icon, correct?

                  Mitch
                  Forno Bravo

                  Comment


                  • Yes, but I tried both ways. Even tried to attach one I attached last week with no luck.
                    My build thread
                    https://community.fornobravo.com/for...h-corner-build

                    Comment


                    • Mitch, I see all communication with the forum appears to be https secure, which I thought was usually reserved for credit card and other sensitive transactions. Is this only on my machine or is this intentional. Maybe part of my problem, or at least a symptom?
                      My build thread
                      https://community.fornobravo.com/for...h-corner-build

                      Comment


                      • JR,

                        One idea from the vBulletin forum is it could be a browser setting/add on; can you try a different browser?
                        Forno Bravo

                        Comment


                        • Maybe. I send you a jpg via gmail. Can you see if you can attach it to a response here?
                          My build thread
                          https://community.fornobravo.com/for...h-corner-build

                          Comment


                          • JR,

                            Your jpg iimage wouldn't upload for me either - showed "corrupted" message. I converted it to a .png and it uploaded, but you may have to play around with the image size.

                            Mitch
                            Forno Bravo

                            Comment


                            • Interesting. If you could open it, it's not corrupted. I'm cutting bricks right now, will play with it later. I also sent you a message the other day via gmail.
                              My build thread
                              https://community.fornobravo.com/for...h-corner-build

                              Comment


                              • Mitch, I just tried to load the exact same images I uploaded in post #206 of my build thread using Explorer 11 (previous failed attempts were using Firefox) and was again told they were corrupted. I have not changed or modified these images since I uploaded them last, so this feels like some change that happened with the migration. These images are "snapshots" from my cad program, but I have been able to post them many times over the past year or so. I'd like to get this resolved or it will make it very problematic to document my build any further. I also tried to reload the image I used in post #203 of my build and received the message "File exceeds PHP's file-size limit of 2.00 MB", which is different as this file worked before. Are there new size limits or is this something that only I am seeing?
                                My build thread
                                https://community.fornobravo.com/for...h-corner-build

                                Comment

                                Working...
                                X