Mold Release

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • benny8
    Laborer
    • Mar 2013
    • 66

    #1

    Mold Release

    Hello-I have found lots of good information on this forum. I am currently in the middle of my oven/outdoor kitchen project. I am getting ready to cast my oven from homebrew refractory. I have gotten good info from David S on this subject. What I need to know is-what can I use for a release agent between my mold and the refractory cement? Will Vaseline(petroleum jelly) work? Or will this effect my cooking from the residue left behind, or effect the refractory cement? Your advice is valued. Thank you.
  • UtahBeehiver
    Member Moderator
    • May 2012
    • 5261

    #2
    Re: Mold Release

    Check with IronPony, he did a top notch castable WFO.
    Russell
    https://photos.google.com/album/AF1Q...L9lr_UnUgJbF3Z

    Comment

    • david s
      Il Pizzaiolo
      • Mar 2007
      • 9211

      #3
      Re: Mold Release

      I use 50/50 motor oil and kerosene, I find it works pretty well. You don't want any more oil than is necessary and by thinning it down this way it can be painted on sparingly.
      Kindled with zeal and fired with passion.

      Comment

      • benny8
        Laborer
        • Mar 2013
        • 66

        #4
        Re: Mold Release

        Thanks David-Would vegetable oil work in a pinch?

        Comment

        • brickie in oz
          Il Pizzaiolo
          • Mar 2009
          • 3445

          #5
          Re: Mold Release

          Id be using Olive oil, at least you can eat the stuff.
          The English language was invented by people who couldnt spell.

          My Build.

          Books.

          Comment

          • david s
            Il Pizzaiolo
            • Mar 2007
            • 9211

            #6
            Re: Mold Release

            I guess any oil would work. Whatever you use will burn away in the oven.
            Kindled with zeal and fired with passion.

            Comment

            • Steve516
              Serf
              • Mar 2013
              • 7

              #7
              Re: Mold Release

              Check with your local masonry supplier. You can buy a standard form release agent.

              Comment

              • Johnny the oven man
                Journeyman
                • Jun 2008
                • 399

                #8
                Re: Mold Release

                Just cover the mold in Cling Wrap.

                Comment

                Working...