G’Day from Australia

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • N8v
    Serf
    • May 2020
    • 4

    #1

    G’Day from Australia

    Hi Forno Bravo community
    I’m just getting into the forum
    im mid way through planing an oven build and still not sure which way I’m going, but it’s a really fun process
    I’ll put up some sketches and pics of location and will record the process of the build too
  • UtahBeehiver
    Member Moderator
    • May 2012
    • 5261

    #2
    Have you purchased the eplans from Forno Bravo, they are a good baseline for designing and building and oven and only $3.00. A little dated. The new innovations can be found on the forum in addition to the eplans.
    Russell
    https://photos.google.com/album/AF1Q...L9lr_UnUgJbF3Z

    Comment

    • N8v
      Serf
      • May 2020
      • 4

      #3
      I haven’t yet. If the plans discuss airflow and chiminey positions then yeh I’ll give it a shot
      I was looking to build an Oven with an added firebox Below that I can open an intake vent to be able to smoke in it too
      the plan is to have a multi purpose oven
      try to get as much use out of it as possible

      Comment

      • N8v
        Serf
        • May 2020
        • 4

        #4

        Comment

        • N8v
          Serf
          • May 2020
          • 4

          #5
          In my head this would work, but I have no experience with these things and from what I read and hear, the airflow can be tricky to get right in a normal oven, let alone this

          any suggestions are very welcome

          Comment

          Working...