Mortar Cracking between bricks before ceramic blanket

[Talr]

Thanks guys,
I'll do as proposed,
Tal

[Chach]

Tal,
I'm assuming that you are using a refractory type premix. Most of those are only appropriate for narrow joints. I would just do the " ....cover mortar layer..." (cladding) and go ahead with the blanket. I think that you will be just fine.

I'd second that idea!

[Gulf]

Tal,
I'm assuming that you are using a refractory type premix. Most of those are only appropriate for narrow joints. I would just do the " ....cover mortar layer..." (cladding) and go ahead with the blanket. I think that you will be just fine.

[Talr]

Hi gulf,,
I'm using premix mortar, on the inside i don't see any cracks, i layed the bricks flush against each other.
Tganks,
Tal

[Gulf]

Hi Tair,

Welcome to the forum. How do the cracks look on the inside? What kind or mortar are you using?

[Talr]

Hi there, many thanks for this forum, been reading a lot here over the past few months (very slow builder!).
The bricklaying is allmost done and i was wondering if it's normal to have so much cracks in the mortar? Asking before i put the cover mortar layer and forward to the ceramic blancket and so on...