Fire won't stay lit

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lifeofpie
    Serf
    • Mar 2013
    • 9

    #1

    Fire won't stay lit

    Hi everyone, I just finished my first oven and I'm having trouble keeping the fire lit. I built it to the instructions, but I think I'm having an airflow issue. Any ideas?
  • Wiley
    Master Builder
    • Mar 2008
    • 804

    #2
    Re: Fire won't stay lit

    Lifeofpie,

    Here are a couple of possible answers: You say just finished the WFO, so is the oven dry? If the oven is still wet/water in bricks/not dried out it won't act properly. Another possibility is the wood: how dry is the wood you are using? The problem could be a combination of the two.

    You might try a draft door to improve draw. I use such a door and it causes my WFO to draw like there was a fan blowing air into the WFO. Shortens time from match to first pizza significantly as well as lessening any smoke that may want to escape out the front. Lots of postings about draft doors, check the archives.

    Hope these ideas help. I'm sure others will chime in with other possibilities.

    Wiley

    Comment

    • michelevit
      Apprentice
      • Mar 2008
      • 106

      #3
      Re: Fire won't stay lit

      Are you using kindling? Make a nice kindling pile before adding more substantial wood.

      Comment

      • boerwarrior
        Journeyman
        • Apr 2013
        • 454

        #4
        Re: Fire won't stay lit

        can you post pictures? Are you starting your fire near the front and only pushing it back once you have a strong fire and draw going? It is very difficult to start the fire in the center of the oven. In my oven, the fire needs to be strong and the chimney hot before I can push everything into the middle and stoke it up!

        Comment

        • stonecutter
          Il Pizzaiolo
          • Jun 2007
          • 2003

          #5
          Re: Fire won't stay lit

          Likely a wet oven as mentioned by the others. If smoke is choking out the fire, then the chimney opening is probably undersized. A small fire built close to the oven opening or a twist of newspaper to heat the flue is going to help get your draw going.
          Old World Stone & Garden

          Current WFO build - Dry Stone Base & Gothic Vault

          When we build, let us think that we build for ever.
          John Ruskin

          Comment

          • lifeofpie
            Serf
            • Mar 2013
            • 9

            #6
            Re: Fire won't stay lit

            I think I was doing a bunch of things wrong. I didn't have enough kindling, too big of a log to start with plus it had about 9.5% moisture according to the meter. Pretty dry, but could be drier. I'll look up a draft door and try everyone's suggestions in the meantime. Also, I'll get a few pics up. Thanks for the help.

            Comment

            • lifeofpie
              Serf
              • Mar 2013
              • 9

              #7
              Re: Fire won't stay lit

              Oh I forgot to mention that I put in an 8" x 24" chimney so I hope that's not too small.

              Comment

              • lifeofpie
                Serf
                • Mar 2013
                • 9

                #8
                Re: Fire won't stay lit

                Here's a pic of it basically done. I also rigged up an automatic door of sorts that uses an RTD in the middle of the floor to sense the temp and then will open or close to maintain the temp. I couldn't find any info on the forums and obviously I'm not sure if it works yet. Has anyone tried this? If so, results?

                Comment

                • hodgey1
                  Journeyman
                  • May 2013
                  • 357

                  #9
                  Re: Fire won't stay lit

                  My 2 cents is your wood has to be wet. If your useing kindling and get that started in the front of the oven with bigger chunks and get those going you should never have a problem. Once its going well under your chimney push it into the center of the oven it will roar as long as your woods not wet. Seasoned wood is easy to identify by looking for cracks/checking in the grain at the end of the logs. If no cracks it's not dry. It takes at least 6 months stored indoors dry to season wood in NW Pennsylvania.
                  Chris

                  Link to my photo album:
                  https://www.flickr.com/photos/hodgey...7646087819291/

                  Link to my build: http://www.fornobravo.com/forum/f21/...nia-19366.html

                  Comment

                  • lifeofpie
                    Serf
                    • Mar 2013
                    • 9

                    #10
                    Re: Fire won't stay lit

                    Makes sense, I'll try starting the fire under the chimney and go from there.

                    Not sure why my picture didn't show up? Did I do something wrong?

                    Comment

                    • V-wiz
                      Master Builder
                      • Oct 2012
                      • 737

                      #11
                      Re: Fire won't stay lit

                      Use a torch to start it up and put a draft door, my draft door quickly and I mean instantly lights the wood into flames.
                      Matthew 19:26. With God all things are possible.

                      My Build: http://www.fornobravo.com/forum/f21/...les-18741.html

                      Comment

                      • brickie in oz
                        Il Pizzaiolo
                        • Mar 2009
                        • 3445

                        #12
                        Re: Fire won't stay lit

                        Originally posted by lifeofpie
                        I also rigged up an automatic door of sorts that uses an RTD in the middle of the floor to sense the temp and then will open or close to maintain the temp.
                        Really? Did you wonder why you couldnt find anything related on the internet?
                        The English language was invented by people who couldnt spell.

                        My Build.

                        Books.

                        Comment

                        • brickie in oz
                          Il Pizzaiolo
                          • Mar 2009
                          • 3445

                          #13
                          Re: Fire won't stay lit

                          Originally posted by V-wiz
                          my draft door quickly and I mean instantly lights the wood into flames.
                          Same here, and little if any smoke.
                          The English language was invented by people who couldnt spell.

                          My Build.

                          Books.

                          Comment

                          • david s
                            Il Pizzaiolo
                            • Mar 2007
                            • 9209

                            #14
                            Re: Fire won't stay lit

                            Originally posted by lifeofpie
                            Hi everyone, I just finished my first oven and I'm having trouble keeping the fire lit. I built it to the instructions, but I think I'm having an airflow issue. Any ideas?
                            Almost certainly believe your problem is a new and wet oven. They are always a bitch to keep the early fires alight. Beware that as soon as the oven interior dries a little and the fire stays alight ok, the rest of it is still wet and in danger of damage if you boost the fire up too soon. Take it slow and follow the guide on the curing thread.
                            Kindled with zeal and fired with passion.

                            Comment

                            • oasiscdm
                              Il Pizzaiolo
                              • Jan 2012
                              • 1239

                              #15
                              Re: Fire won't stay lit

                              Hi

                              Use Doug's method of using heat beads to begin drying process.
                              Cheers Colin

                              Oven 1 Completed

                              Oven 1 and surrounds

                              My Build - Index to Major Build Stages

                              Comment

                              Working...