Kiln dried Vs Seasoned?

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • mikku
    replied
    Re: Kiln dried Vs Seasoned?

    Just got around to clean up around my house. Things accumulate when your busy working elsewhere. Had to cut up a pallet and wanted to show the chop saw that is handy. Actually it is just a large miter saw.

    Click image for larger version

Name:	IMG_1658a.jpg
Views:	1
Size:	401.2 KB
ID:	304275

    Click image for larger version

Name:	IMG_1659a.jpg
Views:	1
Size:	357.1 KB
ID:	304276

    Cannot buy these large ones new any longer but I had a tool guy rebuild one for me. Biggest expense was a new blade. Does not run real fast but it sure can hog through some big blocks of wood. I've been using it recently for some timber framing work--that is why it was out. Decided to make short pieces out of long pieces of pallets that I was burning just to make smoke outdoors.

    Leave a comment:


  • NCMan
    replied
    Re: Kiln dried Vs Seasoned?

    My neighbor has a very large pecan tree he is about to cut down for a lady. He says I can come and cut a few loads when he starts. Looking forward to that. I've never used it, but I hear pecan is much more common down your way in S.C. Pretty rare here. He had some awhile back and sold two half cord loads for $200 each. Then he said the guy would take all he could get him, so I guess he stands to make some good money on this next tree. For $400 a cord, I hope he does.

    Leave a comment:


  • NCMan
    replied
    Re: Kiln dried Vs Seasoned?

    I figured you would. I have a nice little pile of smaller crab apple branches, mostly 1-3". They will be set aside for cooking in the oven, for sure. I also have the rest of the tree, still needing to be split. I wasn't about to leave those branches, though. It was from a storm damaged site.

    Leave a comment:


  • stonecutter
    replied
    Re: Kiln dried Vs Seasoned?

    Apple or cherry, now that's something different to me. I take everything 1" or larger when it comes to those species.

    Leave a comment:


  • NCMan
    replied
    Re: Kiln dried Vs Seasoned?

    It really boils down to supply and demand, it seems. I live in an area where wood is abundant. Most guys also leave the tops/brush. Sometimes I cut a tree down to about 3-4 inches. Yes, for the time and labor involved, it is not "worth it" when there is a huge supply. But I do it anyway, especially if it's hickory, apple or cherry. All of which I have a large supply of. Not to mention the red and white oak, etc. In the summer months here, I also sell firewood to campers that visit a nearby campground, so it's nice to have some smaller stuff mixed in for their campfires. They like it. Like I said, supply and demand.....and time.....and energy.

    Leave a comment:


  • wotavidone
    replied
    Re: Kiln dried Vs Seasoned?

    Originally posted by mikku
    That is a little different than the old mans--but I can see it would do the trick.
    The one you show looks like a swing saw and has some of the guards in place.
    I remember another one he had for a while. It was mounted on a joker. I don't know if you use that term in Auz but it referred to a modified car with most of the body removed that was transformed into a type of truck. You put real big tires on it and could maneuver around in the woods to haul things around. One of the early versions of 4WD --dad had two transmissions, don't remember how he steered--maybe just with brakes--but one powered the front wheels, the other the rear--you would have to shift one into first and the other into reverse to move forward. If you didn't need 4WD, you would have one in neutral. Don't know or remember how he handled the clutches but they were linked somehow...
    My old man did something similar. In the early 1960's he took a 1938 dodge sedan cut the back half of the body off and closed in what was left with sheet metal. This gave him a crude 2 door pick up. he bolted a second gear box on the end of the first one somehow. Only 2 wheel drive, but he could go into low, low gear. Used it to do a fence building job in the hills. The thing would idle up just about any hill that wasn't an out and out cliff face.

    Leave a comment:


  • mikku
    replied
    Re: Kiln dried Vs Seasoned?

    That is a little different than the old mans--but I can see it would do the trick.
    The one you show looks like a swing saw and has some of the guards in place.
    I remember another one he had for a while. It was mounted on a joker. I don't know if you use that term in Auz but it referred to a modified car with most of the body removed that was transformed into a type of truck. You put real big tires on it and could maneuver around in the woods to haul things around. One of the early versions of 4WD --dad had two transmissions, don't remember how he steered--maybe just with brakes--but one powered the front wheels, the other the rear--you would have to shift one into first and the other into reverse to move forward. If you didn't need 4WD, you would have one in neutral. Don't know or remember how he handled the clutches but they were linked somehow...

    Leave a comment:


  • wotavidone
    replied
    Re: Kiln dried Vs Seasoned?

    Those big old saws with the sliding tables are still around over here. They still come up at auctions every now and then. Some people add a stationary engine so they don't need the tractor.
    Same with the tough old buggers who did it hard.
    Some of them are still around, too.
    A friend of my mum's was about 83 when I stopped on a bush track for a yarn with him.
    I noticed he had a big merino ram in the back of the four wheel drive. What's up with the ram, I asked.
    The old timer said he found him out of the paddock on the side of the road. Said he was going to throw the old sheep back over the fence. Need a hand I asked. Nah, she'll be right, he says, I got him up there, I'll get him down.

    I'd have needed a crane and a chiropractor.
    Attached is a picture of a tractor mount saw I got from an auction website - these saws are still relatively common. They go on the three point linkage system that is pretty common on small tractors over here.
    Last edited by wotavidone; 03-18-2014, 02:14 PM.

    Leave a comment:


  • mikku
    replied
    Re: Kiln dried Vs Seasoned?

    Originally posted by stonecutter
    Those were days when men were men, and the logs were huge. I would have liked to see your fathers set-up.
    My father's generation had things tough.

    Old man, came to USA thru Ellis Island in 1914 at 1 yrs old. Family fleeing hard times in Europe chasing American dream. Grandfather worked the underground mines and farmed. Dad attended school but left to work after finishing 8th grade, worked the logging camps when he could. When the depression came he hit the rails looking for work and went all over this country. Got work in West coast logging camps later worked CCC camps and built a whole lot of things. WWII came along, now there was work for everyone! Was trained to work the motor pool to keep our war machine moving. War ended so he put his skills to work-had a engine rebuild shop, cars were scarce because of diversion of manufacturing due to war effort. He would rebuild an engine and when a customer came in--he would just swap engines and get them back on the road--had the core for a new rebuild.

    Yea, men were men and they had to get tough or die. That was the time when some of our social programs came into existence. But people were required to work for their fare. Something has gone drastically wrong with our system.. The roads and parks and bridges made during CCC days are falling into disrepair but we have a huge workforce that gets welfare --we need workfare. Train the youth to use their hands for something more than texting and making trouble.

    Old man would have been 101 this year but he died at 67! The cancer got him along with the hard living of his time.

    Leave a comment:


  • david s
    replied
    Re: Kiln dried Vs Seasoned?

    I find cutting the logs into shorter lengths around 6" long works well. Even really wavy grained hardwoods split easily. It also helps the wood dry out faster. I also use fallen eucalypt branches and look for a fork in a tree to break them into shorter lengths, but I've noticed that the thicker logs are better as the wood is denser.

    Leave a comment:


  • mikku
    replied
    Re: Kiln dried Vs Seasoned?

    Stonecutter,
    It wasn't that long ago!
    I am sure he would have liked you... He always said, if the job is worth doing, it is worth doing well. Sounds like your motto too!

    He has been gone for a very long time, and he is missed.

    Leave a comment:


  • stonecutter
    replied
    Re: Kiln dried Vs Seasoned?

    Those were days when men were men, and the logs were huge. I would have liked to see your fathers set-up.

    Leave a comment:


  • mikku
    replied
    Re: Kiln dried Vs Seasoned?

    Anyone ever use a saw rig?

    It scares me to think of it and I'm really happy nobody ever got hurt cutting wood.

    The rig was something my father made in the time before chainsaws--quite a while back. He welded together a steel frame that would mount to the back of our old Farmall tractor. At least I think it was a Farmall.

    The steel frame also formed the mount for a long shaft and some bearing mounts- One end of the shaft had a flat pulley that a wide flat belt would run on--powered from a side PTO and matching large flat pulley. The other end of the shaft had a threaded arbor- with a huge flange , another big flange and finally a big nut. Installed on the shaft was a 36" circular saw blade.

    The sliding table that ran on grooves and a weight to help return the sliding table to the safe position.

    Thinking now, there were no guards on the flat belt or any kind of guards around that big blade--just that big mother whizzing along at PTO speeds. You could make it run faster by running the tractor engine faster!

    But that is how we cut up wood when I was growing up. The old man could lift the 100" logs onto the table and force the log thru the saw blade at desired lengths. We would be on the drop end--next to the blade to catch what came off when the log was cut. Crazy Finlanders in the backwoods of Minnesota trying to make it through the winter months with firewood for the house stove and sauna. I still can remember the sound of the saw blade singing when it got up to speed! That is over 55 years ago! We did use the branches in those times also! Cutting down a tree took a lot of time with an axe or big hand saw. So all the wood gathered was precious!

    I'm trying to remember, but there was something on the cut off side of the blade that would deflect the log pieces away from the blade. We didn't have to hold on to the piece when it was being cut or stand right next to the blade.
    When there were two adults running the rig, then they would catch the block and throw the wood into a heap.

    Leave a comment:


  • cobblerdave
    replied
    Re: Kiln dried Vs Seasoned?

    G'day
    Most Aussie hardwoods have a wavy grain which is nigh on impossible to split in a block if its still green. But on the other side if completely dry is nigh on impossible to cut into blocks if fully dry. Most wood getters will cut as damp as they can then leave it as long as there are able till selling it. As a buyer sometimes it luck of the draw in what you get.
    I burnt part of the hardwood house frame left from my neighbor Reno. After a few cuts with a tungsten blade all you produced was black dust instead of sawdust. 50 yrs to season in a dry wall makes for really hard wood.
    Did burn well though.
    Regards Dave

    Leave a comment:


  • wotavidone
    replied
    Re: Kiln dried Vs Seasoned?

    Originally posted by stonecutter
    By weight? Man, talk about volumetric variables. Depending on how green the wood is, weight is all over the place. No wonder you guys want dried up deadfall by the ton, that would be a lot of timber.
    Yep. It's a lot of heat. Can be anywhere from $150 per ton up to $300 or more, depending on demand, and whether the seller is trying to make a living or beer money.
    The theory is, by weight most timbers fall within a very small range of calorific values. On the other hand, by volume timbers can vary quite markedly with regard to how much heat you are buying. So it depends what you are used to, I guess.
    Of course over here, half the shonky buggers selling you a "ton" of wood haven't ever seen a weighbridge in their lives.

    Leave a comment:

Working...