Hot Wood Storage Ceiling

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Derkp
    Apprentice
    • Apr 2010
    • 188

    #1

    Hot Wood Storage Ceiling

    I have a 3 1/2 in slab with 3 1/2 perlite topped by 4 1/2 inch firebrick. The firebrick, mostly 4 1/2 X 6 X 18", form the floor.

    The ceiling of my wood storage area, under the oven, gets very hot to the touch after a large party and good fire.

    Could I apply a layer of rigid foam or other appropriate substanceto the ceiling to prolong my oven heat even more? Or am I just wasting time and money?

    Opinions?

    Thanks,

    Derk
  • dmun
    Il Pizzaiolo
    • Jul 2005
    • 4218

    #2
    Re: Hot Wood Storage Ceiling

    The underside of your slab shouldn't be much more than warm after a long firing. I'm thinking residual moisture? Maybe it's gotten wet after construction?
    My geodesic oven project: part 1, part 2

    Comment

    • Neil2
      Il Pizzaiolo
      • Oct 2006
      • 1374

      #3
      Re: Hot Wood Storage Ceiling

      The 3 1/2 perlite is what should do the job. I would not put any additional insulation under the structural slab for two reasons:
      - It is not likely to contribute much to the heat retention of your oven.
      - You do not want the temperature in your structural slab to exceed 500 F or the re bar within will start to loose strength.

      Comment

      • Les
        Il Pizzaiolo
        • Sep 2005
        • 2945

        #4
        Re: Hot Wood Storage Ceiling

        Originally posted by Derkp

        The ceiling of my wood storage area, under the oven, gets very hot to the touch after a large party and good fire.
        Derk - I need to ask the question; what is hot? David has a valid point if it's still curing.

        My opinion of insulating under your hearth; it's like putting roofing shingles on the floor to keep things dry. Do you have an option of putting a couple of inches of board under your hearth brick? As Neil mentioned, the insulation you have should do the job. Hopefully it's still curing.

        Les...
        Check out my pictures here:
        http://www.fornobravo.com/forum/f8/les-build-4207.html

        If at first you don't succeed... Skydiving isn't for you.

        Comment

        Working...