Temperature questions !!!!

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Novaslo
    replied
    Originally posted by waltiti
    Re: Temperature questions !!!!

    Guys im start using the heat gun when I see my pizzas burned at the top edges and at the bottom looks like a pice of paper, also I can't use too much sauce because the dought get wet and is a disaster.

    Thanks for the advice, but I don't think have mositure on the bottom, I use the oven every weekend.

    Thanks for the link deejayoh I will read that and see if this help me, thanks a lot !!!!!!

    Thanks guys
    What you are describing is indicative of the floor of the oven not properly insulated. Is the floor of your oven touching concrete in any way? The floor should be 100 percent insultated and sitting on top of Fiber Board or Insulating Vermiculite Concrete mix. Did you build it that way? The other thing that happens is the fiber board underneath is wet, however you describe that this oven is 2 years old and inside or perhaps out of the weather?

    Good luck -

    Leave a comment:


  • waltiti
    replied
    Re: Temperature questions !!!!

    Guys, this weekend I will try the new recipe, maybe that the reason why I burning the pie edges and the buffalo cheese. I have to wait 3 more days to try that if I don't get crazy before hahahaha

    Thanks to everybody !!!!!!

    Leave a comment:


  • wotavidone
    replied
    Re: Temperature questions !!!!

    1 kg plain white flour, 4 level teaspoons salt, 1 teaspoon yeast.
    Water 600-650 mls, depending on the brand of flour.
    600 in Coles homebrand flour, 650 in Allied Mills Pizza Flour.

    Mix it and kneed it for a while, cover and let it start to rise. Once it is rising, put it in the fridge and let it rise slowly overnight.
    Take out of the fridge 2 hours before you want to use it, and divide it into balls. Let balls rest for at least an hour after dividing it. 2 hours is better. Make pizzas. Eat.

    Leave a comment:


  • cobblerdave
    replied
    Re: Temperature questions !!!!

    G'day
    Secound to what Steve has said.
    At the top of the forum there's a library section and an e book on pizza making.
    I use that reciepe. 500gms strong flour 345mls water teaspoon salt and sachet yeast.
    Regards dave

    Leave a comment:


  • Greenman
    replied
    Re: Temperature questions !!!!

    Waltiti - I think you are right. Without knowing how you were cooking your pizza before getting the brick oven I would guess that you are now dealing with much higher temps than previously (particularly if you were using a domestic oven).

    Give it a go without the oil and sugar, it will probably be the start of a new journey to find the best way to make dough that suits you without the oil and sugar.

    I suspect that you might be able to get away with keeping a little oil in your mix and omitting the sugar. I sometimes replace a tablespoon of water with olive oil in my mix but I don't cook at super high temps either, happy with 3 minute pizza.
    Last edited by Greenman; 01-06-2015, 03:41 PM.

    Leave a comment:


  • waltiti
    replied
    Re: Temperature questions !!!!

    Guys, somebody writes something about the pizza dough and delete that, about don't use oil and sugar, my dough always have both, I do the same recipe for at least 20 years but I have this oven only for 2 years, the recipe could be the problem ????? I hope is that and not something related with the construction.

    Leave a comment:


  • kstronach
    replied
    Re: Temperature questions !!!!

    Originally posted by waltiti
    The best result I get is, I start the fire on the left side with oak, the surface gets 650 -700 After 2hs , the air temp in the dome reads 850.
    Your temps sound ok to me after me after 2 hours, maybey you could try firing for longer to saturate the brick more? Otherwise the heat is always being pulled into the deeper part of the brick that isn't fully heated and inturn will cool the oven slightly, however after 2 hours and at those temps you should not have a problem cooking a handfull of pizzas.

    Your dome temprature wants to be hotter than your floor temp to cook your pizza evenly

    Put some pics up of your pizzas too if you have any so we can see your 'burning' i personally like the charred spots!

    Whats your dough recipie? Your not adding any sugar or oil are you? This could cause some burning at higher temps

    Keith

    Leave a comment:


  • waltiti
    replied
    Re: Temperature questions !!!!

    Ok I will take pictures also i have some old ones of the building progress .

    Thanks guys

    Leave a comment:


  • deejayoh
    replied
    Re: Temperature questions !!!!

    I think there's probably nothing wrong - just learning curve on managing the oven.

    Why don't you posts some pics of the oven so we can all see what you're talking about? Might help.

    Leave a comment:


  • waltiti
    replied
    Re: Temperature questions !!!!

    Yes, I know

    I think something is wrong in my oven , that the surface don't have a high temperature that accord with the air surface to cook like other ovens I see.

    Leave a comment:


  • david s
    replied
    Re: Temperature questions !!!!

    Slight burning of the edges is characteristic of wood fired pizza. Some folk like that slight charred bitterness. You don't have to eat it. Getting the sauce right up to the edges will help it not burn so much.

    Leave a comment:


  • waltiti
    replied
    Re: Temperature questions !!!!

    The best result I get is, I start the fire on the left side with oak, the surface gets 650 -700 after 2hs , the air temp in the dome reads 850, I start cooking pizzas, and when I see the edges start to toast, around 1 minute, I put over the pizza, a pizza pan to protect the pizza edges of burning, and let the pizza cook for 1 more minute, and is done perfect. Thats my technic with the pizzas. For bread, grilling or roast is different.

    Leave a comment:


  • kstronach
    replied
    Re: Temperature questions !!!!

    what temp is your floor when you're cooking pizzas? you should be looking for about 700f on your laser gun or thereabouts. what's your floor make up? have you got any/much insulation under?, it sounds to me like that could be your problem? something doesn't sound quite right if there burning on the top but not cooking properly underneath. if you're firing every weekend moisture won't be an issue

    keith
    Last edited by kstronach; 01-05-2015, 01:29 PM.

    Leave a comment:


  • waltiti
    replied
    Re: Temperature questions !!!!

    Guys im start using the heat gun when I see my pizzas burned at the top edges and at the bottom looks like a pice of paper, also I can't use too much sauce because the dought get wet and is a disaster.

    Thanks for the advice, but I don't think have mositure on the bottom, I use the oven every weekend.

    Thanks for the link @deejayoh I will read that and see if this help me, thanks a lot !!!!!!

    Thanks guys
    Last edited by waltiti; 01-05-2015, 11:46 AM.

    Leave a comment:


  • deejayoh
    replied
    Re: Temperature questions !!!!

    I think it is good practice to move the fire around when you light the oven. Start in in the center. When the dome starts to clear at the top, bank it to one side. When it clears there, bank it to the other. That way the oven gets more evenly saturated with heat.

    Read the chapter on oven temp management in the link that I included in this post. It should be helpful
    Last edited by deejayoh; 01-05-2015, 11:42 AM.

    Leave a comment:

Working...