I have been in the final stages of readying a new beehive oven, been on several other threads about curing. Took about a month of heater/fan inside the oven as I built the enclosure and insulated everything, and the last week and a half or so of increasingly hot/long fires. It's been real cold here, so I've tried to go slowly. Last fire held about 800 f at the dome for about a half hour, and I've been monitoring the temps with an infrared thermo and ramping everything up slowly.
Yesterday my wife really wanted to do pizza, so she stoked it up pretty strong pretty early in the process. We let it cool back down some before stoking it up to a full 900 or so for a while.
The pizza was perfect, but I've got a bunch of hairline cracks showing in the mortar (not the bricks) in a bunch of places. Most of these are in the middle rows. I think the photo shows them pretty well, especially at the top of the photo.
Should I be worried about this, or is this fairly normal? The dome was pretty decently constructed, I hope.
Yesterday my wife really wanted to do pizza, so she stoked it up pretty strong pretty early in the process. We let it cool back down some before stoking it up to a full 900 or so for a while.
The pizza was perfect, but I've got a bunch of hairline cracks showing in the mortar (not the bricks) in a bunch of places. Most of these are in the middle rows. I think the photo shows them pretty well, especially at the top of the photo.
Should I be worried about this, or is this fairly normal? The dome was pretty decently constructed, I hope.
Comment