Announcement

Collapse
No announcement yet.

How does this design look? pro's? Cons?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • How does this design look? pro's? Cons?

    Take a look and see what you think.

    Does all of you wisdom and experiences see any problems?

    Thanks
    Derk

  • #2
    Re: How does this design look? pro's? Cons?

    I really like those big refractory arches. It would save folks a lot of trouble if we had access to those. As for rectangular, high mass ovens, they have their place for commercial bread baking, but most of us here are round oven fans.

    You might want to read this.
    My geodesic oven project: part 1, part 2

    Comment


    • #3
      Re: How does this design look? pro's? Cons?

      Thanks for your reply.

      My son and I saw the arches as we were collecting our firebrik from pallets and pallets of new usused brick at a torn down steel mill. We say 4 and I said to him we had better grab them. The bricks were listed for $1.00 each and .75 for the small ones, arches $4.00. But I traded honey so all my brick cost us gas money to pick them up.

      I will eventually let you know how it turns out.

      The theme of a round on a trailer is interesting, mabey a future project.

      Derk

      Comment


      • #4
        Re: How does this design look? pro's? Cons?

        Derk,

        Any more of those arches available? That would speed up production of my oven considerably, though I've already purchased the kit.

        Greg
        sigpic
        I'm not dead, yet! I'm feeling better.

        Comment


        • #5
          Re: How does this design look? pro's? Cons?

          Greg,

          Are'nt you in Utah county?

          If you are look in the KSL classified ads online for firebrick. It will be an old ad. There is a number there for the people developing the Geneva steel site. I did not see any other arches, they were bulldozed into a pile when I discovered them, but they did have MANY other sizes and shaped that you might be able to use. I am in Bountiful or I would go and take a look. the firebrick is on many pallets on the old geneva site, if you go be sure to take your tape measure, some look rectangle but are tapered.

          Derk

          Comment


          • #6
            Re: How does this design look? pro's? Cons?

            Greg,

            Sorry for the additional post:

            Here is the contact info:

            Dan Seegmiller 801-225-2031 ext. 105

            Jerry 801-368-1966

            Double check the ksl listing under bricks for particulars and requirements.

            Derk

            Comment

            Working...
            X