Hello, I am quite new to the site and to building a wood fired oven but I sure do like what I am seeing and reading here. My question though is about dome height. From what I have read it is ROUGHLY half the diameter of your width in a round oven. Now my plans are to build a smaller oven aound the 28in mark. That would make my dome 14in tall and if you use roughly 61% of that height for your entrance, that gives you an 8.5in opening. I would like to be able to do something like a beer can chicken in it so that opening would be a little small. Next i noticed that the Primavera70 28in oven has an external dome height of 26in. So if you take 2in off for the cast cement and 3in off for insulation, that gives you a dome of 21. Do they make the dome higher to get a bigger opening? Would their be any draw backs to doing this?
Thank you
Thank you
Comment