flue vent

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Robert 808
    Serf
    • Jun 2014
    • 2

    #1

    flue vent

    i am building a brick oven in the igloo shape but i would like the chimney in the center,can i form a 2 inch x 4 inch steel manifold to the shape of the oven,an then cover it in bricks to put the chimney in the center?
  • moderator
    Apprentice
    • Jul 2008
    • 178

    #2
    Re: flue vent

    Take a look at this photo link.

    PhotoPlog - Vent and Chimney

    This is the form we use to center the chimney on our Napolino, Napoli and Vesuvio style ovens.

    We modify the vent landing on the front casted dome and install the form. Then we secure the anchor plate to the top center and pour High Temp Mortar into the channel.

    Comment

    • Robert 808
      Serf
      • Jun 2014
      • 2

      #3
      Re: flue vent

      thank you for the pic. and the information ,i'm going to try this in stainless steel and see if it works.

      Comment

      Working...