Tweet
allo all.my owen-bravo ,the DRAGO D1,START PROBLEM LAST 2/3 day.when i switch on,normally 2 second stop buzzer and work fine.when i start again in the morning the buzzer still ,the pilot start fine,but after 4 second the BRAHMA SM 152N stop work and fix red light.can any mate are idea the problem please?very thank soo much in advance.greeting from uk/newcastle.
-
allo all.my owen-bravo ,the DRAGO D1,START PROBLEM LAST 2/3 day.when i switch on,normally 2 second stop buzzer and work fine.when i start again in the morning the buzzer still ,the pilot start fine,but after 4 second the BRAHMA SM 152N stop work and fix red light.can any mate are idea the problem please?very thank soo much in advance.greeting from uk/newcastle. -
Hi Emanuele,
This is a link to Forno Bravo's Drago Operation. The video says to hold the button down for 10 seconds. If this does not help, the link has a form for direct questions to Forno Bravo.Joe Watson " A year from now, you will wish that you had started today" My Build Album / My Build -
ALLO THANK SOO MUCH MATE.THE PROBLEM RESOLVED AND IS FUNNY BUT IS FROM INCOMPETENCE.my boss ask the company-cleaner to check the camin the fan and the external fan.every 8/10 month need clean for security.dont ask to clean down the owen about DRAGO PILOT AND SOLENOID GAS CONTROL.so,1 guy open the small door back oven,cover the drago-pilot from clotes and FORGET.clean nice around but forget.the day before when i check ,my boss forget tell me about cleaner.because normaly the small door is locked.regards.Comment
Comment