Question About My Chimney Flue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • DaveDQ
    Laborer
    • Jun 2008
    • 59

    #1

    Question About My Chimney Flue

    I set my flue in place the other day and am debating on whether to surround it with courses of brick or to actually put a mosaic on the flue from some stone that I have left over from covering my kitchen counter tops.

    This stone withstands heat very nicely. I'm always placing a pan right off the stove onto the stone with no problems or concerns. My question is, does the flue have to be separate from anything to allow it to expand?

    I would really like to do this as I think the mosaic would look much better than a traditional chimney look.

    Thanks.
    Journal of My Oven's Progress
  • jerrycook
    Serf
    • Sep 2008
    • 20

    #2
    Re: Question About My Chimney Flue

    I insulated and stuccoed my flue. Tiles were put on the suucco. No problem.

    Comment

    • david s
      Il Pizzaiolo
      • Mar 2007
      • 9209

      #3
      Re: Question About My Chimney Flue

      My second oven developed a crack because I used castable refractory around the flue. The xpanding steel flue cracked the castable. I now insulate around the flue before applying the stucco.
      Kindled with zeal and fired with passion.

      Comment

      • DaveDQ
        Laborer
        • Jun 2008
        • 59

        #4
        Re: Question About My Chimney Flue

        Thanks for the replies. What did you insulate it with?
        Journal of My Oven's Progress

        Comment

        • jerrycook
          Serf
          • Sep 2008
          • 20

          #5
          Re: Question About My Chimney Flue

          I used ceramic blanket wraped in wire mesh then covered with stucco.

          Comment

          Working...