Announcement

Collapse
No announcement yet.

oven temp

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • oven temp

    Our oven is finally finished. For curing I have been using a propane torch setup(used for weed burning) and have slowly been heating and cooling. When you speak of "oven temperature" where does this come from. At the setting I'm currently at, I can get temps of 600+ from the dome and mid 300s from the walls and a little less from the floor.

    I have been heating over a 2 week period. Should I continue to slowly crank up the heat to get dome temps of 800+ and floor temps of 500 or am I ready to go?

  • #2
    Re: oven temp

    Once you don't see any steam coming from the oven, slowly crank it up to 1000F. Let 'er rip.

    Mark

    Comment


    • #3
      Re: oven temp

      Let us know how your first pizza works out....Enjoy
      Member WFO-AMB=WW

      Comment


      • #4
        Re: oven temp

        Originally posted by jic View Post

        I have been heating over a 2 week period. Should I continue to slowly crank up the heat to get dome temps of 800+ and floor temps of 500 or am I ready to go?
        Two weeks is more than most, you should be dry. I would think you are ready to go.

        Les...
        Check out my pictures here:
        http://www.fornobravo.com/forum/f8/les-build-4207.html

        If at first you don't succeed... Skydiving isn't for you.

        Comment

        Working...
        X