Possible approach to hearth

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bec1208
    Journeyman
    • Nov 2012
    • 416

    #16
    Re: Possible approach to hearth

    Originally posted by cobblerdave
    Gudday Bruce
    Pretty good guess its 1 mtr 50 mm so you were 2 ins out!

    Thanks, but I'll fess up, at the time I had a brain fart and was thinking a meter was a bit less than a yard.
    Link to my build here:
    http://www.fornobravo.com/forum/f6/3...lly-19181.html

    Check out my pictures here:

    Selected pictures of the build.

    https://picasaweb.google.com/1168565...g&noredirect=1





    sigpic “In theory, theory and practice are the same. In practice, they are not.” ― Albert Einstein

    Comment

    • Bec1208
      Journeyman
      • Nov 2012
      • 416

      #17
      Re: Possible approach to hearth

      Had foundation poured and have started arranging and dry stacking block. I am going to attach a few pictures to be sure I understand the process before starting my build thread. Right now I am planning to do a 36 inch build and look forward to continued feedback and suggestions. Thanks again, Bruce.

      I tried adding images. Worked fine for first jpg but would not allow me to add additional images without removing the previous one.
      Last edited by Bec1208; 03-27-2013, 09:16 AM. Reason: Added image
      Link to my build here:
      http://www.fornobravo.com/forum/f6/3...lly-19181.html

      Check out my pictures here:

      Selected pictures of the build.

      https://picasaweb.google.com/1168565...g&noredirect=1





      sigpic “In theory, theory and practice are the same. In practice, they are not.” ― Albert Einstein

      Comment

      • cobblerdave
        Il Pizzaiolo
        • Jan 2010
        • 2848

        #18
        Re: Possible approach to hearth

        Gudday Bruce
        Now you've done it...... once you've started there is no turning back.
        Welcome!

        Regards Dave
        Measure twice
        Cut once
        Fit in position with largest hammer

        My Build
        http://www.fornobravo.com/forum/f51/...ild-14444.html
        My Door
        http://www.fornobravo.com/forum/f28/...ock-17190.html

        Comment

        Working...