Forum Notice: The forum has been upgraded and restored to November 2. Posts and new accounts created after November 2 were lost. Sorry for the inconvenience.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have 8 thermocouples installed in the oven.
Incredibly piece of information when first using the oven. Steps up the learn curve.
Nowadays I use just 2 of these: the center hearth thermocouple to read the hearth temperature when baking pizzas and the ambient temperature when waiting the temperature down to bake bread and so.
Luis,
I could never forget your thermocouples, or the wonderful termperature heat up and fall off curves you have been able to produce. As you say, that would definitely accelerate the learning curve.
Where are the two thermocouple that you are still using set? The center of the cooking floor about 1 1/2" down from the inside of the oven?
Also, where is the thermocouple that checks ambient temperatures?
Thanks for you input on this. It's an interesting topic.
James
I answered with two digital but they could be analog too...I think it is perfect to be able to accurately gauge the temperature of the masonry in both ceiling and floor...thanks
Dutch
"Making the simple complicated is commonplace; making the complicated simple, awesomely simple, that's creativity. " Charles Mingus
"Build at least two brick ovens...one to make all the mistakes on and the other to be just like you dreamed of!" Dutch
Comment