Tile saw question-

[mfiore]

Re: Tile saw question-

I just bought the same HF saw today. I agree, the extended "no questions asked" warranty certainly seemed worth while. I've been told the sale ends this weekend, but couldn't confirm.

[beaglestorm]

Re: Tile saw question-

Just got my HF saw this afternoon. Since it was on "sale" for 199.99 the Warranty was the next lower tier price of only $19 for 1 year (2 years for 34.99). If it is going to break it will be in the next 6 month as it gets abused building the oven. Good luck.

[thebadger]

Re: Tile saw question-

So far I happy with my HF dry saw (only 15 cuts or so). The only issue is it THROWS up A LOT of DUST. I'm going to try a fan to blow it away from me.

I'm planning on making a jig so I can some angled cuts for the archway.

Dick

[jengineer]

Re: Tile saw question-

Hey Garlic Boy - do a road trip twice and you can borrow mine. I am near LAX in Los Angeles

[PizzaJNKY]

Re: Tile saw question-

Tough Luck for me! I tried to order the HF saw today, and learned they are on back order until May 2nd, with an approximate 2 week delivery time on top of that. No way can I wait that long. I could have waited maybe 2 weeks tops. Oh well, hopefully the Home depot saw I have holds up.

[dmun]

Re: Tile saw question-

I have a seven inch tile saw, a cheap one, that's set up like a table saw, and the water reservoir is beneath the blade. Don't get this one. It throws the sludge up in your face, you can't keep your goggles clean, and you end up covered in mud. Besides, it doesn't cut through on one pass, even for straight cuts.

[beaglestorm]

Re: Tile saw question-

I am buying my HF saw this weekend. I could have borrowed a 14" from a friend and just bought a blade, but I decided to get the 10" HF so I could modify and tweak it to make cuts easier. I bought my blades (MK Brand) on Amazon as I had heard mixed reports on the quality of the HF 10 blade. They were less expensive too! Ohh and the consensus seem to be to spend the $39 or so for the warranty. They will replace the saw no questions asked if anything happens. Good Luck

[RTflorida]

Re: Tile saw question-

I had an old (10 yrs) MK 7" tile saw. Worked like a champ until the brushes and armiture took a dump on me after about 12 firebricks. The HF saw is impressive considering its price and where it comes from. I think several others have been singing high praise for the HF tile saw too.

RT

[PizzaJNKY]

To cut my fire bricks for a 42" Pompeii, I bought the 7" tile saw from Home Depot. It is the Husky brand, that cuts 2-1/4" deep, with the 1-1/2 hp motor.

I've read several threads that praise the Harbor Freight 10" tile saw.

I am not afraid to return the saw I bought, and replace it witht the HF 10" saw, if it will make my job easier. I need to get a really good saw anyway, because my wife has already told me that when I finish the WFO, I have to put tile in our bathroom, and I believe her.

Does anyone have an opinion on whether or not the 10" saw would make my job easier, or will the 7" saw do the trick?