flue location on constructed dome

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Odin
    Serf
    • Oct 2016
    • 21

    #1

    flue location on constructed dome

    My traditional Naples oven that I am restoring now used to have (before I removed it) upper lip style flue – attached sketch.
    While I have removed the lip I have complete dome but with no chimney and entrance. What are your suggestions for installing the flue.
    Should I build additional entrance – like 1 brick length and install flue there or try to drill chimney hole just above current entrance?
  • Toomulla
    Journeyman
    • Jun 2013
    • 264

    #2
    Why are you not rebuilding what you had

    Comment

    • Odin
      Serf
      • Oct 2016
      • 21

      #3
      hi. see my other thread. Oven was in poor condition and I have to change floor and render. SA it was Neapolitan style with upper lip chimney type - I want to make it more traditional oven look with nice round dome and flue in front

      Comment

      • Toomulla
        Journeyman
        • Jun 2013
        • 264

        #4
        Given that the dome is old I would leave it alone, coring a hole large enough for a flue could destroy the old dome , I also do not believe that a flue within the dome will work all that well.
        my recommendation would be to either build an entry two brick deep

        Comment

        Working...