If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Both methods have been used successfully. You'll find some pro/con arguments on both sides, based on theories about thermal expansion of the floor and dome. There are some threads here discussing this.
would it help with thermal expansion to not morter the soldier bricks to the floor of the oven, just let the dome rest / expand on the flat floor of fire bricks?
No kidding! Nice saw. That's my only complaint with the Harbor Freight one...not enough power...takes forever to get through one brick. But it works...
would it help with thermal expansion to not morter the soldier bricks to the floor of the oven, just let the dome rest / expand on the flat floor of fire bricks?
Right. I would mortar the soldiers to one-another, but not to the floor. Let them stand freely. Anyone disagree??
I am also at this stage and my oven floor is on the inside - I am a little worried about the floor expanding and inturn cracking the dome or maybe the dome will expand....mmm
In theory, the dome and the floor, made of the same material and similarly insulated, will heat up and cool down as a unit. In practice, the fitted-in floor always has a slight gap between the wall and the dome wall which fills up with fluffy wood ash. No problem either way.
Comment