FB Board to concrete slab

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ERASMO
    Laborer
    • Oct 2008
    • 85

    #1

    FB Board to concrete slab

    I was searching the forum and was looking for the best material to adhere the FB Board to my already cured precast hearth slab.
  • jmhepworth
    Journeyman
    • Feb 2008
    • 293

    #2
    Re: FB Board to concrete slab

    Just set it there. When the oven is on it, gravity keeps it all in place. No need for any adhesive.

    Joe
    Joe

    Member WFOAMBA Wood Fired Oven Amatueur Masons Builders America

    My thread: http://www.fornobravo.com/forum/f8/j...oven-8181.html

    Comment

    • ThisOldGarageNJ
      Il Pizzaiolo
      • Mar 2009
      • 1436

      #3
      Re: FB Board to concrete slab

      unless you have some kind of leveling problem, I agree with joe, the weight of the floor and dome is not gonna let it go anywhere and no need for anything underneath...
      cheers
      Mark

      Comment

      • dmun
        Il Pizzaiolo
        • Jul 2005
        • 4218

        #4
        Re: FB Board to concrete slab

        I set my insulating boards (insblock19) into my wet concrete, which isn't a choice for you. If the boards don't sit flat, you can use the fireclay/sand mixture to level them, but as Joe and Mark said, gravity always wins.
        My geodesic oven project: part 1, part 2

        Comment

        Working...