Giordino70

[rossano]

Hi,

I'm getting the Giardino 70 kit and have a few questions.
Im looking at the installation manual and on page 19 where they show the mesh on the dome.Is it fastened to the base of the oven and to the arch at the opening with some sort of screws? If so,is it ok to drill into it with a concrete bit and what i imagine would be rawl plugs for the screws?

[horrocks007]

Re: Giordino70

How did everything work out for you? I saw your posts, I just ordered my giardino 70 yesterday. I Am surprised no one responded.

[rossano]

Re: Giordino70

Everything worked out great. You will love your giardino

[horrocks007]

Re: Giordino70

So did you end up screwing the wire mesh into the oven, or did you just let it hang around the insulation?

[rossano]

Re: Giordino70

Yes. I did. I put a minimum amount of screws to hold the mesh to keep the shape I wanted. I used short tapcons. Just long enough to hold mesh and fender washer

[rossano]

Re: Giordino70

I just did that on the front of the oven.

[horrocks007]

Re: Giordino70

Thanks, I am sure I'll need to do the same thing.

Did you have a picture of your finished oven? I would love to see it! There are not a lot of Giardino-70 pics on here.

[rossano]

Re: Giordino70

Send me your e mail address and i can e mail you some