hello... I'm getting closer to getting the oven on top of my constructed base, exciting! (should the hearth dry for at least a wk before loading it with the oven?)
Once I mortar the dome joints and cover with insulation, how does one put a stucco surface on top of the 'squishy' surface of the insulation? I understand you can use the metal stucco lath available at home depot, but l'm not getting how it all stays together to allow the stucco to be applied artfully? is everything wired together somehow? is the lath somehow anchored to the hearth?
I'd like to make this vaguely aesthetic, without having to start over when I mess it up.
Any help appreciated.
Ben
Once I mortar the dome joints and cover with insulation, how does one put a stucco surface on top of the 'squishy' surface of the insulation? I understand you can use the metal stucco lath available at home depot, but l'm not getting how it all stays together to allow the stucco to be applied artfully? is everything wired together somehow? is the lath somehow anchored to the hearth?
I'd like to make this vaguely aesthetic, without having to start over when I mess it up.
Any help appreciated.
Ben
Comment