Should the sand / clay mix under the floor bricks be wet or dry? I understand that the main reason for this mix is to ensure as smooth a surface as possible, but the FB instructions are a bit unclear on this point:
Do not mortar the floor in place, but rather spread a thin layer of sand and fire clay to provide a slip plan between the oven and hearth. That will allow them to expand thermally at different rates.
The underfloor is paste, the texture of a sticky mortar, comprised of 1 part fine sand and 1 part fireclay
Any thoughts?
Do not mortar the floor in place, but rather spread a thin layer of sand and fire clay to provide a slip plan between the oven and hearth. That will allow them to expand thermally at different rates.
The underfloor is paste, the texture of a sticky mortar, comprised of 1 part fine sand and 1 part fireclay
Any thoughts?
Comment