Final Finish - Stucco and Chicken Wire

[JamesLynn]

Re: Final Finish - Stucco and Chicken Wire

Thanks David, Being a local Aussie like myself, do you have any recommendation for the coating itself. I can mix my own render or go with a ready mixed commercial product. Any recommendations? I have a bit of experience with mixing my own mortars, concretes, etc and that's the way I am leaning currently. I see lots of references to commercial products but many are not available in Australia.

Cheers
James

[david s]

Re: Final Finish - Stucco and Chicken Wire

I use two types of plastic fibres. some really fine ones and the other are course. The temp never gets anywhere near hot enough to weaken or melt them, but yes on a thin layer the odd course one does poke out occasionally, but you just pull it out and put it somewhere else. another way to do the chicken wire that works quite well is t cut small pieces about 6"x 10" approx. and place them, overlapped in the layer as you go.

[JamesLynn]

Re: Final Finish - Stucco and Chicken Wire

Thanks Les, David,

Les, Makes perfect sense. Same practice as concrete reo.

David, S, what are reinforcing fibres? I am familiar with the various concrete fibre reo techniques.... is this what you are refering to? Glass and Plastics Fibres that you add to to mixture before application? If it is, given the thickness of a typical stucco coat do you get issues with the fibres sticking out. I don't what the oven looking it needs a shave...lol.

Regards and thanks
James

[Les]

Re: Final Finish - Stucco and Chicken Wire

To address the issue I've decided to add a layer of insulating blanket and then the stucco finish.

My question relates to securing the chicken wire over the Stucco.:

This seems to contradict. If you are adding the blanket, just wrap it around your existing dome and secure it with bailing wire. You should try and get the chicken wire in the middle of your stucco coat. To do that I used re-bar to make the form. In your case, I would simply use pieces of brick to achieve the desired spacing between blanket and wire. Does this make sense?

Les...

[david s]

Re: Final Finish - Stucco and Chicken Wire

I gave up using chicken wire ages ago.It is difficult to wrap around the compound curve. I now only use reinforcing fibres.

[JamesLynn]

Hello All,

Having completed my oven several years back my wife has decided that I really should complete it 100%. (lol). I initially insulated my oven with a 4/5" layer of Vermiculite/Cement Fondu. However after about six months of use I started to get cracks and heat leakage in the insulating layer. It's not a huge issue as the oven continues to function brilliantly. The only problem is that I can't really Stucco over the vermiculite as it will not withstand the heat leaks.

To address the issue I've decided to add a layer of insulating blanket and then the stucco finish.

My question relates to securing the chicken wire over the Stucco. What have others done to keep the chicken wire in place before you apply the stucco. While chicken wire is flexible, I am going to have to secure it down somehow. How have people been doing that? The oven doesn't exactly have hooks on it! I have seen lots of pictures but can't see what they have done to secure the chicken wire in place.

I saw one post that said not to worry about the chicken wire, but I think that's just asking for trouble as you need something to hold the stucco together in case of cracks. :