Gardella 42" oven

[cgardella]

Re: Gardella 42" oven

Finally made some solid progress on the base. I had some days to take off work (use it or lose it) and I put the time into the oven. Very satisfying work. Anyway, I posted a few pictures of my progress.

There ended up being a gas line going right through the middle of my oven location. So I had to do some creative engineering to get the walls to work out.

Still hoping to get the slabs poured before winter!

[cgardella]

Re: Gardella 42" oven

Well, progress is about as fast as expected (which is to say slow). I finally got all the foundation trenches dug. I had to dig down 2' in order to get the top of the footings below the frost line. The stiff clay and rocks certainly didn't make that easy.

Now I need to set the concrete forms and start pouring concrete. Fall has arrived in NC and cold weather is around the corner. I better pick up the pace!

[cgardella]

Re: Gardella 42" oven

Official ground breaking this weekend! I only made one major mistake; I didn't have any beer to help with the digging I hope the construction goes relatively quickly. I hope to at least have the stand and prep table constructed before the freezing weather shuts me down. My wife thinks my son (now 3 mo. old) will be helping me finish the stone work on the outside I think she knows me too well.

@ John, thanks for the info. I ended up making the vent/landing area as wide as possible. Both in an effort to keep it from feeling too cave like/enclosed and giving me an area to stage the pizza before they go in the oven.

~Colin

[barhen]

Re: Gardella 42" oven

Australia Perth

I've just started on latest project 42 inch wfo . I sure ive seen the angle for the soldier row on the forum but now cant find it !!!! Sio please can someone put me out of my misery and remind me of the angle to cut to the soldier bricks

Trev

[Aegis]

Re: Gardella 42" oven

Welcome to the best project you ever did! My vent is 8" deep and takes up that much of my landing! I don't recall total landing, but 15" comes to mind.
The vent area does not add to the landing, it takes some of the space above it. Hope that is clear and correct!
Enjoy the ride! John

[cgardella]

Re: Gardella 42" oven

Well I got most of the details hammered out and submitted for a permit today. Shouldn't take long to get the approval (also have tentative approval from my wife).

I've never been this excited to dig a big hole before.

[cgardella]

Hello all,
I've been lurking in the forums for two years or so while in the planning stages of my oven. I finally have the time and property of my own to actually build the oven. Right now I'm drawing the oven in CAD and I have a question about the landing. I tried going though as many posts as possible prior to posting and I apologize if this has been addressed/asked before.

The Pompeii plans call for an 8" vent landing and a 12" oven landing; so that's a total of 20" in front of the opening to the oven. For a 42" oven, its another 42" to the back of the oven. So that's 62" (over 5') to get too the back of the oven.

I'm considering modifying the plans to have a 12" vent landing and eliminate the oven landing. I like the look of the oven landing but I'm concerned it will be difficult to reach the back the oven.

I'm wondering if really should be concerned? Is the length of a typical peel handle long enough to retrieve a pizza from the back of the oven without scorching your hand?

Thanks in advance